20 Most Recent
John Deere Gilmour Traveling Sprinkler - 4010j - Page 4 Questions & Answers
Lost all power on my John Deere D160
limited info generic answer pop can be anything check fuse and solenoid --check for spark --fuel to narrow down problem --no spark electrical problem --no gas fuel problem
Which wire needs to run to the battery to charge
Being unfamiliar with mowers, the battery seems accessible. So there is no need for having a socket or appoint other ways.
Trickle chargers have both cables, one with small clamps for the terminals and one permanent pigtail cable. The cable with plug that can be installed is always bolted onto the terminals.
Ground wires should be a distinct green/yellow color and the main negative is a thick one that just bolts onto engine or frame. A test will then find 12 Volt wires of those that are life when the engine is switched off. I don't have high hopes of those being many and charge is performed at maximum of 1/10 the battery Amp at most, usually it is much less like hundreds of Milliamp?re. Especially when a full charge is being reached. Also for metering the Voltage a battery installed cable is the right choice. It determines charge on tenth of a Volt. 12 Volt batteries are close to being depleted and 12,8 up to 13,2 Volt are full. Charging with the engine running would show 14,2 Volt on a motorcycle.
Not finding what you are looking for?