20 Most Recent Vtech 5867 Cordless Phone - Page 4 Questions & Answers

Here is the internet address for the phone's user manual. Read the settings instructions. https://www.manualslib.com/manual/745244/Vtech-Cs6124-11.html

Make sure that in settings...of each phone... the ring number are the same.

You would forward the calls thru your service provider. Not thru the phone set. It is usually something like *72 or *73. then enter the number. Your service provider can tell you the numbers.

1. In settings try to turn up the volume. 2. Using a Q tip and some alcohol make sure the mouth speaker is clear. 3. Check with Telco to make sure the telephone line itself is working properly.

Is the crackle sound on all phones or just the cordless?

Sounds like a telco trouble can you check that the main Dial Tone is good at the Network Interface box?

In this article, you will meet a very good recovery program that will handle all the stress for you. It won't require a technician after all. You can do the job easier and faster. For better step by step procedures follow these guides: Step1. Download FoneDog - Android Data Recovery, Install and Launch Step2. Connect Samsung Galaxy S Note to the computer Step3. Select Files for Data Extraction Step4. Select Device Fault Type Step5. Download Mode Step6. Retrieve deleted messages by preview and selection Hope it can help you sooner. Good luck.

check landline connection

Go to set up menu or tools and simply disable unwanted features.............

MAke sure the fuse in the inside is not blown

https://cdn-media.vtechphones.com/ecp/documents/product.../mi6890_manual.pdf

https://www.ifixit.com/Wiki/Vtech_Kidizoom_Smart_Watch_DX_Troubleshooting

1. Product Support: 1.800.521.2010.
2. Fax: 1.847.400.3601.

New battery may need charged, and/or base charger may be bad. Try a different base, preferably one that is known to be working. Or if possible, take the battery from identical type of handset (that works) and try in suspect unit. Then threre's always the possibility the handset is kaput.

Failing elastomeric connections at the LCD. Search "lcd zebra connect fail".

I have had the same problem and the 4th base is probably bad.