20 Most Recent
Microlife 3AC1-PC Blood Pressure Monitor - Page 9 Questions & Answers
What to eat to raise blood pressure
nothing to eat unless you want to clog up the heart but dehydration or lack of regular water intake affects blood pressure
talk with a doctor as you need to fully understand "blood pressure" and what it means in the body
Low blood pressure readings are normal and it is the high pressure readings that are dangerous
Again talk with a doctor to be correctly informed and what your particular blood pressure readings should be
Will I graduate optometry in 4 years after?
hi
i don think you can finsh it in 4 yrs
An optometrist holds a Doctor of Optometry (O.D.) degree, which takes seven years of study to complete. O.D.s diagnose vision problems, diseases of the eye and related diseases. They are also responsible for prescribing corrective eyeglasses and contact lenses.
jQuery('.intro .thumbnail').each(function(i,e){
jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); });
});
Difficulty: Challenging
Instructions
Things You'll Need:
- Academic Counselings
- College Catalogs
- School Of Optometry Catalogs
- Computers
- Online Career Search
-
Take numerous science and biology courses in high school.
-
Go to a college where you can take three years of pre-optometry courses. Consult your guidance counselor during your junior year about colleges that offer such a program.
-
Find and visit optometry Web sites with the help of a major search engine like Google or Yahoo. Look for information on optometry schools and their admission requirements.
-
Take the Optometry Admissions Test during your second or third year in college. The test will measure your academic and scientific knowledge.
-
Apply for admission to optometry schools accredited by the Council on Optometric Education of the American Optometric Association. Keep in mind that competition is great.
-
Complete your optometry school's four-year course of study and pass a written and clinical state board exam.
-
Apply for your state license after receiving your O.D. degree. You should ask your state's Board of Optometry well beforehand about its licensing procedure.
-
Consider a one-year postgraduate program if you want to become a specialist.
Lights will not turn off and after turning on scooter in a few minutes, hear a beeping
If the lights on your Golden 3-wheel scooter won't turn off and you hear a beeping sound after turning it on, it could indicate a potential issue. Here are some troubleshooting steps you can try:
- Check the key switch: Ensure that the key is inserted fully into the key switch and turned to the correct position. Sometimes, if the key is not fully engaged or turned properly, it can cause electrical issues. Try removing the key, reinserting it, and turning it to the correct position.
- Examine the battery connections: Inspect the battery connections to ensure they are secure and free from corrosion. Loose or corroded connections can affect the scooter's electrical system. If you notice any loose or corroded connections, carefully tighten or clean them as needed.
- Verify the charger connection: If the scooter is connected to a charger, make sure it is properly plugged in and connected to the scooter. A loose or faulty charger connection can cause electrical malfunctions. Try unplugging and reconnecting the charger to ensure a secure connection.
- Check the scooter's manual: Refer to the owner's manual or user guide for your specific model of Golden 3-wheel scooter. It may provide troubleshooting steps or information about the beeping sound and lights issue you are experiencing. Look for any error codes or indications that can help diagnose the issue
Lights will not turn off using button and after turning scooter on after a few minutes hear a beeping sound?
The problem you're having with your scooter's lights not going off when you press the button and hearing a beeping sound after turning it on could be caused by one of several factors:
Electrical Malfunction: An electrical malfunction, such as a short circuit or a defective wiring connection, could be causing the lights to stay on and the beeping sound to occur. This could be the result of a faulty switch or an issue with the electrical system.
Insufficient power from the battery or a poor electrical connection can cause the lights to behave abnormally and generate warning sounds. It is conceivable that the scooter's battery is not correctly charging or that there is a problem with the charging system.
Faulty Control Unit: The control unit, which regulates the scooter's many operations, could be faulty. It's possible that it's misinterpreting the commands, causing the lights to stay on and the beeping sound to play.
Sensor or Sensor Connection Issue: Sensors on scooters detect numerous conditions, such as kickstand position or battery level. A faulty sensor or a faulty sensor connection could create strange light behaviour and activate warning messages.
Ew-72 scooter stuck in reverse
If your EW-72 scooter is stuck in reverse, here are some steps you can try to troubleshoot the issue:
- Check the throttle lever: Ensure that the throttle lever is in the neutral position. Sometimes, the lever may get stuck in a certain position, which can prevent the scooter from switching gears.
- Reset the scooter: Turn off the scooter and disconnect the battery. Wait for a few minutes and then reconnect the battery. This can sometimes reset the scooter's electronics and resolve the issue.
- Inspect the reverse switch: The EW-72 scooter has a reverse switch that controls the direction of the motor. Check if the switch is properly engaged or if it is damaged. You may need to refer to the scooter's manual or contact the manufacturer for specific instructions on accessing and inspecting the reverse switch.
- Check the wiring: Examine the wiring connections around the reverse switch and ensure that there are no loose or disconnected wires. Sometimes, poor connections can cause the scooter to get stuck in reverse.
- Seek professional assistance: If the above steps do not resolve the issue, it is recommended to contact the manufacturer or a qualified technician who specializes in electric scooters. They will have the necessary expertise and equipment to diagnose and fix the problem.
Remember to always prioritize your safety when working with electrical devices. If you are unsure or uncomfortable performing any troubleshooting steps, it's best to seek professional help to avoid any accidents or further damage to the scooter.
How do eye masks work?
When your brain senses pure darkness, it causes the production of melatonin, the chemical of sleep. To help induce this state, you can also use
earplugs. When you block out both noise and light, your chances of falling asleep are improved. People who sleep regularly during the day, such as nurses or other shift workers can benefit greatly by using them.-
http://www.dreamessentials.com
My ua-767 blood pressure moniitor no longer pumps up with a reading of err 3 have replaced batteries
When you encounter an error message "Err 3" on your UA-767 blood pressure monitor, it typically indicates an issue with the inflation or measurement process. Here are a few steps you can take to troubleshoot the problem:
- Ensure proper cuff placement: Make sure the blood pressure cuff is placed correctly on your arm. It should be snug but not too tight. The cuff's bottom edge should be about one inch above your elbow.
- Check for cuff positioning: Verify that the cuff is positioned at heart level. Sit upright with your back supported and your feet flat on the ground. Rest your arm on a table or armrest, palm facing upward, with the cuff at heart level.
- Confirm battery installation: Double-check that the batteries are correctly installed in the monitor, with the correct polarity (+/-). Ensure that the batteries have enough power. Try replacing them with a fresh set of batteries if necessary.
- Perform a reset: Some blood pressure monitors have a reset or restart option. Consult the user manual or manufacturer's instructions to determine if your model has this feature and follow the steps to reset the monitor.
- Check for air leakage: Examine the cuff and tubing for any visible damage, such as cracks, holes, or leaks. Ensure that all connections are secure and airtight. If you notice any issues, consider replacing the cuff or contacting the manufacturer for assistance.
- Contact customer support: If the issue persists after attempting the above steps, it's recommended to reach out to the manufacturer's customer support for further assistance. They can provide specific troubleshooting steps or advise on potential repairs or replacements.
Remember to consult the user manual that came with your UA-767 blood pressure monitor for any model-specific instructions or troubleshooting guidelines.
What is pet therapy and why is it an improtant issue?
What is pet therapy?
Pet therapy is a guided interaction between a person and a trained animal. It also involves the animal's handler. The purpose of pet therapy is to help someone recover from or cope with a health problem or mental disorder.
Dogs and cats are most commonly used in pet therapy. However, fish, guinea pigs, horses, and other animals that meet screening criteria can also be used. The type of animal chosen depends on the therapeutic goals of a person's treatment plan.
Pet therapy is also referred to as animal-assisted therapy (AAT). AAT is sometimes confused with animal-assisted activities (AAA). AAT is a formal, structured set of sessions that help people reach specific goals in their treatment. AAA involves more casual meetings in which an animal and its handler interact with one or more people for comfort or recreation.
Pet Therapy Definition and Patient Education
Not finding what you are looking for?
