Bosch Classixx WFL 2066 Front Load Washer - Answered Questions & Fixed issues

the tool will be a spanner of the right size The warranty is the receipt of purchase as that gives the date of purchase

You can download the user manual at: http://lesepc.com/uploads/b/bosch-classixx-wfl-2066-manual.pdf

pump

Drain filter/catch basin is most likely blocked with food. You should be able to access it by the inside of the dishwasher...check you manual if you have one for components.

Hi,
Here is a tip that I wrote about how to buy appliance parts online...

How to Buy Appliance Parts Online
http://www.fixya.com/support/r3907570-buy_appliance_parts_online

heatman101

Sensor, don't post the same question 20 times

Try this linky: Download instruction manuals

My one beeped every 30 seconds to tell me that the cycle was finished.It should stop itself after about 15 minutes,or just turn the machine off.

go to store and buy washing machine cleaner and run it in your washer and it will smell great again. I think Tide makes it but not for sure.

Have you tried a boil wash ? Also check that the drain pipe has no kinks or sharp bends in it. I know we managed to get the drain pipe cleared :-) But the next step may be to check that the waste pipe you are connecting to is not also scaled up. If you can take the drain pip off again, check and see if the pipework you are connecting to is also clear. Other than that, this may actually be a failing drain pump. Check the rest of your pipes are clear in the house (where the machine is plumbed into). Then do a boil wash - hottest wash you can, NO SOAP and empty drum. Hopefully that will let the machine clear everything else out.

I would check that the drain pipe is also clear. You can actually get a build up of old soap powder in the pipework. This pipe would be on the rear of the machine (grey in colour) and would connect to your waste pipe (perhaps under a sink) If you can pull the machine forward and check to see if this pipe is indeed blocked, or even restricted. I found this answer that may help you. https://uk.answers.yahoo.com/question/index?qid=20120322120919AANhp8H

Hello when you start the machine do you hear clicking from control board if do all you need to do is replace the carbon brushes on the motor. They are cheap to get does require removing back pannel I found better to remove motor easy access hope that helped :)

check to see if there is any power going to the main board and if not you have a problem with a plugin, but if power going to main board then you have a fuse blowed, ie ceramic fuse.

pull out the plug check the carbons they may be worn

It's very common. There is a high efficiency washing machine cleaner you can use in is as well as cleaning the gap in the seal for the door. Some machines also have a filter to catch small objects and if that is not clean it can smell as well. If you need further help, I’m available over the phone at https://www.6ya.com/expert/justin_3ae27a9d61d6acd4

There are 2 possible reasons for this .The drain for the washer may be kinked at the back preventing the water being pumped out . The pump is virtually a water circulator and not a pressure pump so any obstruction will keep water in the washer.. Next --the spin cycle may be to slow for the water to be spun out of the clothes. Check the load is not above the recommended weight as this makes the spin cycle slow. IT is better to do 2 washes rather than to cram it all into 1 wash. Check the filter at the pump as they tend to block up with lint and other gunk from the clothes and the water may be unable to get to the pump Powdered detergents are 90% clay( fine as talc powder and used to carry the detergent) and this settles out in the lower parts of a machine so if you use powder I would recommend changing to liquid

take of the child lock by pick the last program you used and pressing the clock button for five seconds

when you changed the bearings did you check the spider for any broken legs on it or have you firmly fixed the belt pully

change the valve

take out plug first check your heater check the motor