20 Most Recent Bosch Axxis+ WFR 2460 Front Load Washer - Page 8 Questions & Answers


Go online to the manufactures select user manual eric992

Bosch Washing... | Answered on Sep 27, 2019


Water censor could be blocked preventing the machine from advancing,turn off machine and blow into the water outlet pipe the exit may be blocked preventing the censor from restting eric992

Bosch Washing... | Answered on Sep 27, 2019


No water getting in check water inlet pipe is not twisted or turned off eric992

Bosch Washing... | Answered on Sep 27, 2019


Replace unit its to expensive to call an engineer or at least get a quote on the repair. eric992

Bosch Washing... | Answered on Sep 27, 2019


Go online to the manufactures eric992

Bosch Washing... | Answered on Sep 27, 2019


Go online to the manufacturers eric992

Bosch Washing... | Answered on Sep 27, 2019


Go back to the place you bought it,it still under gar-ante eric992

Bosch Washing... | Answered on Sep 27, 2019


Check if the inlet pipe has not twisted,if ok unplug machine remove top and (if confident enough) get a multi meter to check if the coil is not open circuit (broken),if so replace it eric992

Bosch Washing... | Answered on Sep 27, 2019


To determine that the door lock is broken,unplug machine take the top off and push the drum towards the rear get your hand and locate the door lock and release the door,replace lock eric992

Bosch Washing... | Answered on Sep 27, 2019


You will need to use a screwdriver to remove it with force and then determine if the softener capsule has not dislodged preventing the opening of the draw in the first place eric992

Bosch Washing... | Answered on Sep 27, 2019


It seems that the water pump has stopped working,you will need to replace it,have a friend check it with a multi meter to determine the fault if open circuit replace pump,the best way is to go to a scrapyard and find a replacement,take along your multi meter to test the replacement eric992

Bosch Washing... | Answered on Sep 27, 2019


The bracket that came withe the machine will only fit in a predetermined place,look for the bolt holes in the concrete weight on the drum the other two smaller bolts will fit onto the framework eric992

Bosch Washing... | Answered on Sep 27, 2019


iit could be that your machine is not pumping all the water out down to a level that allows the cycle to continue,unplug the machine and try to blow down the outlet pipe,if you cannot then (only if your confident)remove the back cover and disassemble the water pump to remove the blockage,reassemble and try again.eric992

Bosch Washing... | Answered on Sep 27, 2019


It seems to me that the water pump is not emptying fast enough that seems that there might be something stuck in the pump clogging the outlet,first of all turn the machine off blow down the outlet pipe,if you cannot blow into it then remove the back cover and remove the pump housing to remove the blockage,resemble and there should be an improvement in the spin problem

Bosch Washing... | Answered on Sep 27, 2019


Washer may need descaling use a good cleaner at high temperature without a prewash minimum 75’degrees

Bosch Washing... | Answered on Sep 24, 2019

Not finding what you are looking for?
Bosch Axxis+ WFR 2460 Front Load Washer Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

pump blocked cannot open remove cap

  • Washing Machines
Loading...