20 Most Recent Simpson PS2600 PowerShot Commercial-Duty Gas Powered Pressure Washer Questions & Answers

Maybe bad pump. Remove wand and wand hose, run machine with water in. High pressure water coming out of wand/hose connection, bad wand or hose. No high pressure water, bad pump, replace.

Butch if carb was good and clean and linkages were re installed properly including governor, it is possible the throttle tab/lever (what linkage hooks to) is loose on the shaft that opens the throttle butter fly. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." DIY Tecumseh Snowblower Carburetor Throttle Shaft Lever Repair PART 1

google uv 760 and you will find it

Sounds like nozzle is too small or faulty unloader valve

where do i get a washer for the wand?

Have you checked the oil level? Some engines have a sensor that shuts it down if the oil is too low

Here's some sites that hopefully help you... https://duckduckgo.com/?t=ffab&q=SIMPSON+13SIE-170+UK+HANDLE&atb=v159-1&ia=web

https://simpsoncleaning.com/tips/2016/top-10-common-mistakes-gas-pressure-washer-owners-make/

You first have to pry the cap off the wheel with a screwdriver then under the cap there should be either a pin which you pry off or a nut which you loosen.

That is what it is supposed to do.

There is a pressure release valve in the pump. That pressure release valve is frozen shut (probably due to calcium or lime buildup). Other than disassembling the pump and clearing the calcium mechanically the only thing that I can think of is pouring CLR (Calcium, Lime, and Rust remover) into the port where the water hose connects and hope that the CLR will dissolve the calcium or lime. Pour as much CLR in as you can, connect the hose and pull the trigger and immediately release the trigger. You may have to pour CLR into the hose port several times.

Is the pump running?

yep good idea It is a faulty product so there should be no problems for the refund

just normal oil vapor from blow by from the ring operation get a new air filter as cleaning filters leads to dusting problems

Because it can!