Black & Decker 9072CTN 2.4V Cordless Screwdriver - Page 6 - Answered Questions & Fixed issues

You can try loosing them off a little and use some lubricant as well say spray lithium grease or wd-40 or crc.

Demnnchens of saw blad

Go to yahoo.com

Go to Yahoo.com and type in the manual you are looking for.

Wrenches and sockets.

Go to Yahoo.com and type in the manual you are looking for.

You need to call a tech. It could be low on Freon, maybe sensing valve, may be dirty coils. There are a number of things it could be.

Go to Yahoo.com and type in the manual you are looking for.

You can't.

Check bearings or bushings

go to youtube.com and search, many helpful videos

Go to Yahoo.com and type in the manual you are looking for. it will tell you how to fix the trigger

Go to Yahoo.com and type in the manual you are looking for. Or go to Youtube.com and post the above questions.

Search Yahoo.com and you will find out.

Between the set screw and the bit. Use pliers to unscrew. U may need to hold the bit so it does not burn at the same time. Just like a drill :)

Need more details as to whats not working.

Here is a video.

http://www.youtube.com/watch?v=wWTA72ZsJsE

http://www.tooled-up.com/product/aeg-bl9618-9.6v-to-18v-fast-cordless-battery-charger/172801/

try some mineral oil.

It could be a bearing and you may get by with taking it apart and putting a little white grease in the bearing.