20 Most Recent Poulan P3314 14" Gas Chain Saw 2.0 Cuin 33CC 2 Cycl - Page 9 Questions & Answers


There are many different uses for industrial vibrators. The main uses are to separate different materials and using the force of gravity can make materials line up so they are easier for a mechanical arm to pick them up.

Tools & Hardware... | Answered on Jun 11, 2019


Take it to a gunsmith and get it properly rebuilt with new parts. You can't possibly use it with parts missing. Have you seen the YouTube videos of guns blowing up!

Tools & Hardware... | Answered on Jun 08, 2019


Broken wire in the winding of the armature.....It will have to be replaced......Cheaper to buy a new Dewalt or Millwaukey............

Tools & Hardware... | Answered on Jun 04, 2019


-You mean to push the staple forward to its hummer area...? If so. you should not have to. But if it's too tight for the staple then yes or bend out the channel just little wider for more clearance.


Good luck

Mai

Tools & Hardware... | Answered on May 28, 2019


Hello Robert, you can find that tool in stores like Lowes, I sent you a link about it; specifically, this model is not available in the market, maybe you can find it in web pages, such as Craigslist. https://www.lowes.com/pl/Drill-presses-Presses-lathes-Power-tools-Tools/4294607825

Tools & Hardware... | Answered on May 18, 2019


Check incoming voltage umder load. if its under nameplate volts when running you have overcurrent. check fan inside housing for damage or blockage. finally check disch pressure to make sure no restriction blockage in line. Im Pentair engineering person

Tools & Hardware... | Answered on May 17, 2019


HI. I think I have the same problem. I cannot loosen the collet nut on my 5142 router to change the bit. The router is super powerful and great for a router table but since I got it years ago, changing the bits has been difficult. Might try the heat but worry it could effect bearings and grease etc.

Tools & Hardware... | Answered on May 16, 2019


The only solution isn't easy. Disassemble and clean, then reassemble.

Tools & Hardware... | Answered on May 13, 2019

Not finding what you are looking for?
Poulan P3314 14" Gas Chain Saw 2.0 Cuin 33CC 2 Cycl Logo

126 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

18110 Answers

Bill Boyd

Level 3 Expert

53755 Answers

Brandon Bruce

Level 2 Expert

75 Answers

Are you a Poulan Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Poulan Tools & Hardware - Others

  • Poulan Tools & Hardware - Others

Most Popular Question

just replaced carb new spark plug new

  • Tools & Hardware - Others
Loading...