20 Most Recent AO Smith 2 HP 115/230V 56C Replacement Motor - Page 8 Questions & Answers

so acquire the instructions from moen and get it done right

call a plumber

Every 2-3 weeks, someone or something clogs it.

i would think as long as the ratings are the same yes. why not

It most likely needs to be primed. Check the owner's manual for instructions.

When you next get the smell, check the traps to see if there is enough water in there to fill the trap, if one is less then it looks like water is getting sucked out when toilet is flushed or that trap (usually bath or shower) hasn't had water going in (lack of use) and water has partially evaporated.

yea the one you are about to spam us with

yes it can if you have hooked it up correctly and as to your additional info ?? and if trying to get more pressure is your cut in and cut iut or the pressure switch set correctly if not all the pumps in the world not going to give you more pressure and if well lines are plugging with debris the same problem

The handle and base of a kitchen fixture can work free after some time. A free fixture handle can meddle with the capacity of the spigot to turn on and off proficiently. Then again, a free base can move openly and cause the water lines providing the spigot to burst, causing a break. Fixing either of the two parts will incredibly diminish the aggravation related to a free kitchen spigot. Eliminate any items in the sink bureau that meddle with your capacity to arrive at the two inventory valves situated at the rear of the bureau. Turn every valve clockwise to kill the stockpile of water to the fixture. Inspect the fixture handle. You will either discover a setscrew with a recessed hex head at the handle base or beautiful covers snapped on the highest point of the handle or handles. You can also choose a residential plumbing Edmonton to solve your problem.

If the old hose isn't leaking, why change it. They discolour internally due to the type of water you have. Chalky water makes white calcium deposits and soft water more brownish. Perfectly normal.

things happen even to the best diyer you either live with it or get it replaced by a professional sad to say

Sounds like your water supply lines under sink where they connect to faucet unit are loose oo they didn't apply plumbers putty under the faucet unit it self

Depends on the model, but if it is the 4 star shaped then just prise the centre cap off to reveal a screw head that if unscrewed will release the handle.

sorry but you need to call a local plumber

The cartridge may have been installed with the incorrect orientation.

replace the worn seals or parts inside it

What information do you require ... try google.

I too have a Belanger tub and shower set and the taps have no screws under the caps or hex keys around the sides for removal.

Visit Lowes or Northern Tools stores to ask for assistance.