20 Most Recent
Powermatic 1660791K Model 66 10-Inch Left Tilt 5 Horsepower Cabinet Saw with 50-Inch Accu-Fence, 2 Cast Iron Extension Wings, Table Board, and Legs, 230-Volt 1 Phase - Page 5 Questions & Answers
Need the tray for Husky wet tile saw
Hi,
please check your local home depot or lowers for the part. You can call them or search their website for the product.
Thank you.
11/6/2022 2:04:31 AM •
Saws
•
Answered
on Nov 06, 2022
Circular saw locking bolt turns spindle
There is a button on the saw that holds the shaft still. Unplug the saw and put light pressure on this button while you slowly turn thr blade by hand. When it gets to the hole, the button will drop into the shaft. Keep it pressed down and unbolt the nut.
10/31/2022 1:28:32 AM •
Saws
•
Answered
on Oct 31, 2022
B & D #3051 worm drive saw: How do I access the return spring for blade guard?
Link,
Usually you will have to remove the blade guard to get access to that. There is usually a rubber stop with a screw going through it that you will have to remove, and a spiral spring clip on the inside of the hub of the blade guard that will also have to be removed and then you should be able to lift the blade guard off the saw. The spring will hook around the blade guard and the other end will hook to the saw housing. Hope this helps!
10/2/2022 1:31:01 AM •
Saws
•
Answered
on Oct 02, 2022
My water line is stopped up and I am not getting water to the blade.
Remove the line from the pump and ensure the pump is working. If so then replace the line to the pump and remove the other end. If you are getting water from the pump in step one but not in step
two, then I would agree. Your line is stopped up. Simply measure the ID (inside diameter) of the hose. Measure the length and replace it. Because sometimes whatever is in the line will tear up the hose while you're trying to get it clear, so I would simply replace the hose.
8/14/2022 6:40:00 PM •
Saws
•
Answered
on Aug 14, 2022
Where canI get macallister flip saw manual
Category: Tools, power tools, power equipment group: Circular SawDevice: Mac Allister MSCS1200You can find a full manual at the link below
6/30/2022 7:22:58 PM •
Saws
•
Answered
on Jun 30, 2022
Not finding what you are looking for?