20 Most Recent DeLonghi DE500P Dehumidifier - Page 6 Questions & Answers

The hose is supposed to be in the tank. Someone emptied the tank and forgot to put the hose back.

Apparently NOWHERE! Contact DeLonghi direct https://www.delonghi.com/en-int/products/comfort/air-treatment/dehumidifiers This search query should have shown lots of places, Maker direct, Amazon, eBay and Appliance parts suppliers like Part Select dot com. It's very odd. https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00f9Jx3klLUl0dKNUo5ffEHVuQLMA%3A1612057058213&ei=4gkWYNW0DJWq1QGmg6TQAg&q=DeLonghi+DN+125+R+Dehumidifier+replacement+filter ..

Some dehumidifiers have provisions for connection of an ordinary garden hose to drain into a tub, a standpipe, or a sump pit.

Not sure. Might have a blown fuse or bad capacitor. Here are some DIY steps: https://www.manualslib.com/manual/606569/Delonghi-Dehumidifier.html?page=7#manual https://www.hunker.com/13408722/delonghi-dehumidifier-troubleshooting https://www.veranda-interiors.com/dehumidifier-runs-but-wont-collect-water https://www.delonghi.com/en-us/customer-service

The E3 Code, indicates that the air intake filter needs to be removed and cleaned. Be sure the unit is OFF and unplugged before removing the filter. Filter cleaning should be performed at least once every two weeks, as part of Routine Maintenance.

all this info is in the manual. Either you threw it away or are a person who does not like to read.

The tank may be full. Your dehumidifier has a safety device that turns off the dehumidifier when the water tank is full. Usually the tank itself either presses against a switch or there's a device connected to the tank that triggers a switch when the tank is in place and full.

If you've emptied the tank and the unit doesn't run, inspect the place where the tank rests to see if there's a switch or mechanism that's not being activated. You may be able to turn it on with a simple flick of your finger.

Usually happens when the float valve is stuck in the down or up position try wiggling the handle to release or if the collection bucket is not sitting perfectly on the safety switch has to be down square I have the delonghi dem10 model always empty and unplug before checking

Dear Heemin, From the wording which you have used, it appears you think you are talking to the DeLonghi company. You are not. You are speaking to "fixya:". Please contact DeLonghi or one of it's dealers by finding their access information on your computer's search engine. God bless your efforts.

Free online manual: https://www.manualslib.com/manual/228038/Delonghi-Dde40e.html#product-DDE%2050E Delonghi DDE40E Use And Maintenance Manualhttps://www.manualslib.com/manual/254660/Delonghi-40eddh30.html#product-DDE%2050E

Are you worried as to why there is no Water in the Water Tank/Bucket at all? Well, a few operational basics must be understood by you please. For the unit to remove moisture from the air and draw water into the bucket/tank, the set relative humidity (%RH) must be below the current or ambient room relative humidity. Attempt to lower or reduce the setting you have to a lower value and it should start collecting water in the tank. Hope this helps

http://docs.bigassfans.com/haiku/Haiku-A2-Install-Guide.pdf We Are Here to Help !! Donald Deane MCSE,ASE,CPO

It's basically an air conditioner so if the fan is running---the condenser not plugged up via rats nest---lint----the float switch working---if possible tip over switch working----the system maybe low on refrigerant

The normal operating temperature is above 65 F. Much below unless specially designed for low temperature they will freeze up. They have a frost detector and will defrost but it is very inefficient and not practical. My experience they eventually form a block of ice on the coils. They heat the room in the process so in a moderate area they can raise the temperature and provide needed circulation. In the past where the temperature is cool I have faced the output into a corner, raised it off the floor and once the unit got started the heat created from the unit kept the air warm enough to avoid freezing up the coils. Always check for recalls. Some models have had problems and have been recalled. See the link below. Gree Reannounces Dehumidifier Recall Due to Serious Fire and Burn Hazards... Hope this has helped?

if your unit is old enough to "not" have a gfci on the plug that goes in wall then im not aware it has any fuse inside it that could go bad , instead these rely on the homes proper electrical ckts to provide fuse/breaker functions that keep a fire from resulting if appliance overloads , now as for reasons of overloads these are many ! can be anything from water in the wrong place to a damaged motor inside

id be inclined to think that for some reason the pump is taking too long to pump tank out (or it thinks it is ) this would cause the fault you describe and the safety control shuts pump off for fear of a problem

18 kg or 39.6 lbs