20 Most Recent
Electrolux Epic 6500 Vacuum - Page 5 Questions & Answers
There appears to be no power coming to the hose at
You should be getting full voltage reading. The points deliver the voltage to the wires in the hose which transfers the power to the power nozzle. It is most likely a fault inside the machine itself.
Repair manual for Electrolux EPIC 6500 SR
I don't have a manual for these but the trickiest thing about these units is taking them apart. If you have an Aerus/Electrolux dealer near you, it's not a bad investment to have them install the motor for you. You would probably receive a warranty with the work, and the things a long time. Great return on investment. But if you are determined to do it yourself, open the front of the canister and remove the bag. As you are looking at the front of the unit, there are two vinyl coverd strips that run the length of the unit. Pull forward on these strips and then pull out so that the vinyl seperates from the plastic underneath. Now grab the plastic strip with a pair of needle nose pliers and pull towards the front of the canister. These can be tough if the machine has never been opened up before, but pull as hard as you need to, to slide the strip out. Once both strips are out, turn the machine over, pull out on the sides of the bottom of the unit, and lift up. The bottom should come of relatively easily, and eveything will be exposed. Good Luck!!
How does a electrolux Epic
The top and bottom of the canister need to be separated to gain access. I don't recommend this being done by the owner as it is tricky taking it apart, and even trickier reassembling it. Please take it to an authorized Aerus Electrolux store for a trained service tech to repair.
I've seen many vacuum come in to the shop due to the owner being unable to put it back together, putting it together incorrectly , and/or having broken pieces.
http://www.aerushome.com/storelocator/
Not finding what you are looking for?
