Canon PIXMA MP287 ALL-IN-ONE INKJET PRINTER - Answered Questions & Fixed issues

http://dimasio.com/error-code-list-from-canon-mp280-mp287-mp288-mp495-mp497-mp498-printer.html

->Turned off printer ->Press STOP / RESET and hold, then press and hold the POWER button.->While POWER button is pressed, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed.->Release both buttons simultaneously. ->The computer will detect a NEW DEVICE, Ignore it .....->This situation indicates the printer which Error P07 is in a state SERVICE MODE and ready to reset with software.**If you need any technical help on printer then you can reach at http://www.vtechsquad.com/printer-support/

Hi. Color cartridge is defective and need to be replaced

Canon pixma mp287 p10 error

http://canontechsupports.blogspot.co.uk/2013/06/error-6000-or-p03-on-canon-printers.html

Massage in Scaning problem in error code 2.14021

If you have any queries related to Canon printer and you want to resolve it immediately then you don't need to be worried just make a call @ 0800-098-8371 Canon printer contact number UK and our tech expert will happy to resolve your all tech issues of printer within few minutes. http://ukhelpdesknumber.co.uk/canon-printer.php

on the computer click on the printer and devices under the control panel line at the top of the connected items you will see --add a printer you will click on the add a local printer then follow the instructions on the screen

Please go to the following website which describes the procedure needed to fix your printer. You will need to download a resetter, the link to everything is in the instructions:

http://ekohasans.blogspot.com/2011/02/how-to-fix-mp258-p07-error-5b00.html

Error 5100 for canon mp 287 - Canon PIXMA

Canon pixma paper jam

Canon pixma keeps jamming, Tear down and look inside for small shreds of paper and blow out.

How to take out paper jam

hi. that mean ink are running out. or totally empty.

http://www.canon.co.uk/support/consumer_products/product_ranges/printers/pixma/error_codes/#b200 B200 Error- This could also be displayed as P10 or the orange and green light blinking 10 times Description: B200 is a service error that can occur due to a hardware failure with either the printer or the print head. Resolution: In most instances, a B200 error will require a repair at a Canon authorised repair centre, however prior to sending your printer for repair please follow the steps below to try and resolve this error-

1. Turn off the printer
2. Disconnect the power cable
3. Open the printer cover
4. Check for any orange protective tape or white polystyrene and remove if necessary
5. Check that there are no foreign objects in the printer (such as a paper clip) and remove if necessary
6. Close the cover
7. Reconnect and turn on

If the error message is still showing, then it is necessary to deliver or send the printer to an authorised repair centre. If the printer is still under warranty, (generally one year from purchase) and supporting documentation is provided, then a free of charge warranty repair will be carried out. If the warranty has expired, then any repairs can only be carried out at cost and charges will apply. You can find the details of your nearest repair centre using our interactive repair centre locator. If you own a PIXMA PRO-1 please contact us directly as you may be eligible for an on-site repair.

Hi Mary, Searching online has given me the following information: it's a major problem requiring replacement of the main board and possibly the scanner unit.

Try this solution I found on a German site. Other sites I found did not even mention E06 as possible. Site is linked below, you can use GoogleTranslate to convert to your own language. Good luck!

Error E06 Canon MP287

The characteristics or signs:

• Currently in turn on the printer does not print the worksheets.
• ALARM indicator light lit In follow with lights flashing orange ink information.
• LED indicators display appears on E06

How to Reset Error E06:

• Press and hold the stop / reset until the standby light green and then release.
• If the indicator light still flashing again, repeat again by pressing the stop / reset.
• Finished

Dunia Printer

Usually that type of message means either the print head was not a Canon authorized print head or the chip that the unit reads is damaged. All you can really do is ask for a refund from where it was purchased, or get another one from a Canon authorized retailer. "Never purchase a reconditioned print head, for exactly this reason" Be aware of "Pirates" who call you, ask you what type of printer or copier you have and as soon as you tell them, they all of a sudden have what you need at a huge discount. Its a rip off.

You may download the MP280-series software and drivers from here.

It means the "Ink Absorber" is Full / Almost full. There an excellent Step by step/ How To fix video on Youtube for this model of printer: https://www.youtube.com/watch?v=-6DmGIVtWLE Enjoy !