20 Most Recent Kenmore Elite Oasis 27052 Top Load Washer - Page 7 Questions & Answers

Yes, probably the fill valve.

Possibly a foreign object in the pump that when disturbed by water flow is blocking the impeller. I once found a sewing pin in the pump of a machine. It would sit in a recess in the pump and sometimes jam the impeller when disturbed by the flow.

I assume you're talking too high for removal or adjustment of the leveling feet to be enough to fix the problem. If there is bare underlayment beneath the stove you might consider removing 2" squares where the feet sit. This will probably only drop you 1/4 inch though. Appliance outlet (online) offers several brands of slide in backgaurds and "gap fillers" that may suit your needs... not sure how much you're needing though, so just a shot in the dark.

You have coins in your drain pipe and pump!

Hi


Thanks for using FixYa. Error code LD means Long Drain. It flashes when washer takes longer than 5 minutes to pump out water to a point where the operating pressure switch resets. Press STOP/CANCEL to clear the display. Common causes for this are kinked drain hose or clothing, like panties or socks, caught in the pump suction hose.


Please do rate the solution and revert for further assistance.


Thanks

Rylee

Honestly, we got rid of the machine and bought a Maytag Neptune. I was over trying to figure out all the codes the Oasis was flashing. We gave up on the first one that started having problems when a friend gave us one identical to ours and it has done a lot of the same things.

There should be a troubleshooting guide in your user manual that will give you the error code meaning. If you don't have the manual, perhaps you can download on on-line. Just for giggles, I would unplug the unit for a minute or so, and see if that resets the processor. It's just a thought. I hope this helps.

Hi,
Here is a tip that I wrote about no water coming into the washing machine...

Washing Machine Problems No Water
http://www.fixya.com/support/r3880845-washing_machine_problems_no_water

Washing Machine Fix Washing Machine No Water
http://www.fixya.com/support/r3880533-washing_machine_fix_washing_machine_no

heatman101

OK...What is the Question? Here? If you need a Manual . Call Sears. They practically give them away or tell you where (ON their web site) to view one! I did not observe a structured QUESTION here! So I hope I helped If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Rotor position sensor need to replce. Search on parts side according to model no for part.

maybe there 's just something with the spinning motor...try applying some grease..

It's the bearings in the inner tub that are bad. The manual says the tub is under warranty for ten years and will be replaced free minus the labor. That is no longer true. They have come up with a tool to replace the bearings and none of that is under the 10 year warranty. I found out the hard way and it cost me almost 300 bucks. Unless you have the tool you can't do it yourself. They don't tell you that when you schedule a service call. That model is junk.