Top 20 HP LaserJet CP1515n Printer Questions & Answers

you should check transfer belt or fuser unit.

Hi there, my name is Lisa and I'd be happy to help you with your LaserJet CP1515n. The following document will help you to troubleshoot the issue you have described: HP Color LaserJet CP1215 CP1217 CP1514n CP1515n and CP1518ni Printers One... I took a second look and found this one too: HP Color LaserJet CP1514n CP1515n and CP1518ni Printers Resolving Print... I hope this helps. I work on behalf of HP.

Hi Joshuachidem, If you are not a technician then it can be tricky... They are not a user replaceable item, so I would recommend getting a trained HP tech to replace it. If you have a new fuser and you still want to try it, just let me know... Cheers John

depending on the driver installed on the printer if its ps (post script) try the following.

1. In Control Panel, open the Printers (or Printers and Faxes) folder.
2. Right-click your PostScript printer, and then click Properties.
3. Click Printing Preferences, click Layout, and then click Advanced.
4. Double-click PostScript Options, and then click TrueType Font Download Option.
5. In the True Type Font Download Option box, click Automatic. If Automatic is already selected, click Outline or Bitmap.
6. Close the Printer Properties dialog box, and then close Control Panel.
7. try printing out again. I hope this helps
8. http://h10032.www1.hp.com/ctg/Manual/c01070718.pdf user manual if it helps.

there is a setting within the economy mode to omit blank pages=yes/no which is likely set to Yes- set to no and try again

Check options before printing. Look at the properties button next to the printer model when ready to print, and read all the options.

here is a video that shows you

no is ok

CALIBRATE THE PRINTER

Use the menus
1. Press OK to open the menus.
2. Press the Left arrow ( ) or Right arrow ( ) button to navigate through the listings.
3. Press OK to select the appropriate option. An asterisk (*) appears next to the active selection.
4. Press the Back arrow ( ) button to scroll back through the submenus.
5. Press X to exit the menu without saving any changes.

Color Calibration
? Power On Calibration. Specify whether the product should calibrate when you turn it on.
? Calibration Timing. Specify how frequently the product should calibrate.
? Calibration Mode. Specify the type of calibration the product should use.
? Normal
? Full (slower)
Full calibration improves the color accuracy of photos printed on 100 x 150 mm (4 x 6 in)
HP Color Laser Photo Paper.
? Calibrate Now. Set the product to calibrate immediately.
NOTE: You must click Apply before your changes take effect.

? Restore defaults-used to reset all customer-accessible menu settings back to the factory default
settings (except language) via the control panel or software
NOTE: This service menu item does not reset factory-settable settings, including formatter
number, page counts, factory paper settings, language, and so on.
NOTE: Before restoring defaults, print a menu structure report and a configuration page. Use the
information on these pages to reset customer-specific settings.
CAUTION: All HP Jetdirect settings are also reset. Be sure to print a configuration page before
restoring defaults. Make note of the IP address that is listed on the Jetdirect configuration page. You might need to restore the IP address after performing a cold reset.
Restore the factory-set defaults on the (HP Color LaserJet CP1510 Series Printer

1. Press OK to open the menus.
2. Use the Left arrow or the Right arrow button to select Service, and then press OK (Select).
3. Use the Left arrow or the Right arrow button to select Restore defaults, and then press OK.
The product automatically restarts.

1) Turn off the printer.

2) Shutdown the PC to which the printer is connected.

3) Remove the USB/Serial cable through which the printer connects to the PC.

(4)Open the Front / Back Door of the printer and take a blower and clean any dirt inside. This will remove all the small paper particles that causes paper jam.

5) Now, reconnect the USB/Serial cable and switch ON the PC (only PC and not the printer).

6) Let the PC boot up and login to windows.7) Now, switch on the printer, PC should detect the printer automatically now.

reinstall the printer pcl6 driver

Hi,
Get it online by clicking on this link:freemanualonline.blogspot.com/2011/03/hp-laserjet-cp1215-user-manual.html


Thanks!

Here is the correct link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3422468&lc=en&cc=us&dlc=en&lang=en&cc=us

drum & film problem

Hi,
I have a similar HP Color Printer on my desk. I think that your printer is set to PRINT IN GRAY SCALE
- Go to Control Panel
- Open 'Printer & Faxes'
- Right Click the Printer and choose 'Printing Preferences
- Go to Color and un-check 'Print in Gray scale as shown below: -



Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Hi there,
How long have you had this cartridges? Have you tried replacing them. It could be indicating that they are about to be depleted and a replacement would be necessary.
Hope this helps!

Hi

Please upgrade your Pinter.....

Good day.
First try to print a print status report. Here are the steps:
1.Push setup menu button, that would be the wrench icon. 2.Push the right button to navigate until you get to the Tools Menu 3.Tools Menu>Push button for Printer Status Report
This will give you the accurate ink levels on your printer. If it still shows low ink based on the printer status report, you have to reseat the ink cartridge and make sure the orange tape near the HP Logo on the ink cartridge has been peeled off.
If the report shows ink levels are fine, then that status report on the front panel is just a false report. Try powering off your printer and powering it back on again. As long as you don't have print quality issues, you should be fine.

Please go to this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3422468
Under Step Two: Select a Download you can choose the software you need.

Hope this helps.
Thanks