20 Most Recent
HP Deskjet F4140 All-In-One InkJet Printer - Page 3 Questions & Answers
Hp deskjet f4140 wont scan button just blinks
You will have to reinstall the printer/scanner drivers (check on the internet for your type/model and download the drivers if you can't find the original install cd). Usually the HP website is your best bet for old or new driver sets. Source(s): http://h10025.www1.hp.com/ewfrf/wc/produ? Hope it works.
HP Deskjet F4140, computer HPVista
Perform the steps below to restart the spooler.. this will clean the print queue.
(1) Click "Start" > "Run".
(2) Type "services.msc".
(3) Click "OK".
(A window will pop-up with so many services listed)
(4) Locate and Right-click "Print Spooler" entry and Select "Restart" from the drop down menu.
(5) Now please restart the computer.
if the issue still persists, i would like to know what exactly are you trying to do...
* Printing a picture
* Scanning a picture
Black cartridge still has plenty of ink. Printout
Hi There it worth a try.
Follow these steps to unclog the printhead
1. Right click in the printer driver name
2. Select Properties menu
3. Click Maintenance tab
4. Click on cleaning sign for regular cleaning. Perform this up to 3 times.
5. If this does not work, perform Deep Cleaning
And if that not work
Some times it needs a good clean up but this is up to you if you want to do this,
But after you done this prime the printer so it gets the inks back in the heads, it may take a little time for the inks to work.
Ok.
There is fluid cleaner for this but I can never find any in the shops the only ones I seen is when they sell them in Tesco but they come in with the ink refill bottles so I just use worm water by it self on a cloth and dabbing on the heads to clean them, it will not harm the heads but not to much water.
Some heads are on the inks them self but some have them inside the printer so I not know your printer so if the heads are inside you need to get them out you may find that some heads will just clip out put some need to be unscrewed so you got to know how they come out so be careful and not push to hard on them, if the heads are on the ink then it is a easy job to clean them,
It worth a try it worked for me more than ones.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks
Had paper jam, now printer will not turn on
Hello there
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Paper jam
Follow all steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00856446&cc=us&lc=en&dlc=en&product=3235310
Not finding what you are looking for?