20 Most Recent eMachines T3642 Refurbished AMD Desktop Computer - AMD Athlon 64 4000+ 2.6GHz, 1GB DDR2, 250GB SATA - Page 2 Questions & Answers

I believe it is this,1) http://www.youtube.com/watch?v=KN6_-8fYHo0(Starts at 0:04)2) http://www.capacitorlab.com/visible-failures/index.htm3) http://www.youtube.com/watch?v=YCSNWi3UHf4For additional questions please post in a Comment.Regards,joecoolvette

Computer does not boot up The problem maybe the RAM, it is faulty or just needs reseating to make proper electrical contact. Reseat the RAM and then boot up your laptop. If it still does not boot up then remove the RAM module/s and take them to your friendly computer repair shop and get them to test the RAM for you.

HiYou will be able to purchase the CD from any computer shop near to your home.Also you can purchase it from the website of the Microsoft.Click Here in case you want to get more information.In case if you have any more trouble do contact back in Fixya.Thank you

Test all power and data leads that attach to your hard drive IDE,SATA the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have secure dust free connections and are not faulty or just replace them they could be faulty motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail

make sure all leads that are attached to your drives dvd\cd floppy have secure dust free connections and are not faulty or just replace them they could be faulty a computer needs

power and data to travel through every working device and to continue its cycle and have an end so any faulty leads will end up with a computer error

even something as small as a faulty power lead or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly

make sure ram modules and cmos batteries have dust free secure seatings and cmos battery has charge some motherboards cmos batteries are soldered in

you might not have enough computer ram

not having enough computer ram will run your computer over its limits putting to much strain on the CPU central processing unit and can cause memory dumps

you might have to many programs trying to or accessing the internet at the same time scroll to bottom toolbar (bottom of screen) right click select task manager applications you will see whats running if you see anything you dont need running select end now and you might uninstall that specific program if you or computer does not require it to run and some unnecessary programs that could be jamming up your computer also under processes see what is ticking over in the background again if you see something you dont need to be and users you will see who is using your computer you might need to add more computer ram if you're not sure if a module is right for your system use the Crucial Memory Advisor tool for a list of guaranteed compatible modules. first you will need to select the manufacturer from a drop down list then select your product line from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system you should always ask for a guarantee on the compatibility of the ram before making any purchase

might be getting hot

check you CPU make sure its securely seated and has thermal grease

http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490

hope this helps

A good way to tell is disconnect your hard drive's, & CD/DVD ROM's power & data cable. Try to boot.If you get the same results then you can try & remove any PCI cards from the board, remove your ram stick. Try to boot. If you get an error beep because you are missing ram than this is good.Replace 1 ram stick back into your motherboard & try again. If it boots then you know the other stick is bad.If removing all the non-essentials from your motherboard doesn't work then all you have left are the motherboard & power supply. A simply power supply tester or spare power supply will tell you if it is your board or not.

contact you ISP internet service provider they should be able to supply you one free of charge depending on your current contract and if the modem is broken they will be able to check it online for youhope this helps

Get onlineand got to www.google.com In the google search box type: "eMachineSupport" or "Gateway" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.You can also try Driver Guidehttp://www.driverguide.com

Hello good day, just remove your SATA cable from your hard disk if your using a SATA type HARD DISK, change with a new one, or try to pull it back and put it back tightly. It's just a loss contact situation.That's why you are receiving that message.

Check your sound card in the Device Manager Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

See http://www.manualowl.com/m/eMachines/T6528/Manual/119527 which is the manual for your eMachines T6528 system and has information on replacing hardware components including disk drives.

You should try to boot in safe mode without the card removed..If this got on after an update it is possible (almost sure) it messed up with your graphic card driver and now it needs to be reinstalled > To do so ..try to boot in safe mode...To do that press the key indicated on screen for boot menu and choose safe mode ...usually it is f8 key or f12 ..depend on the model .If it seams not to be able to find the safe mode boot ..try to stop the computer by unplugging it ..This will force it to stop improper way ..and will show the screen for safe mode and other ways to boot-up .select the first safe mode ..and let it start ..This mode will not load any drivers and work just with the minimum needed for to start .Go to control panel ...remove programs ..and remove the graphic card driver from the list ..after that if you have the disk insert it and run the driver again in original ..If you do not have it look for it on the manufacturer's site ..and download it ..If you need help with the driver ..let me know exact model of the computer ..and if it is not an on board card I need to know the exact model of the video card ..

Specs can be found here:http://www.fic.com.tw/product/motherboard/AMD/k7m-nf18g.aspx

test all leads that attach to your hard drive including electrical extensions SATA / IDE

the leads from your ((motherboard to your hard drive)) make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty

make sure all leads that are attached to your drives dvd\cd have secure connections and are not faulty or just replace them they could be faulty

even something as small as an electrical extension or a faulty fan lead can cause you problems computer needs all of the data and power to travel through every working device and to have an end for a computer to be able work properly

a motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive check all electrical extensions make sure they are securely seated even the cd/dvd drives need to have current go through make sure these devices are working

might be getting hot

check the CPU make sure it has thermal paste and dust free secure seating

also check your computer ram modules and cmos battery make sure they are dust free and securely seated some motherboards cmos batteries are soldered in

hope this helps

dry erase??never heard of this expression before ,if its what i suspect that formatted the hard drive and re-installed the windows programme then yes you will need the original boot up disk to install the sound drivers .

Thirteen quick beeps at startup on an eMachines E520 usually indicate a problem with the laptop's RAM (Random Access Memory). This could mean that the RAM is not properly seated in its slot, or it could be a sign of a faulty RAM module.

Here are some troubleshooting steps you can try to resolve this issue:

Turn off the laptop and disconnect it from the power source.
Remove the battery from the laptop.
Locate the RAM compartment on the bottom of the laptop.
Check to make sure that the RAM module is seated properly in its slot. You may need to remove and reinsert the RAM module to ensure a proper connection.
Replace the battery and turn on the laptop.
If the problem persists, try removing the RAM module and testing it in a different laptop or using a different RAM module in the eMachines E520 to determine if the problem is with the RAM module itself or with the laptop's RAM slot.
If none of these steps solve the problem, it may be necessary to contact a computer technician for further assistance..