eMachines T6534 PC Desktop - Page 3 - Answered Questions & Fixed issues


Hi
You will be able to purchase the CD from any computer shop near to your home.
Also you can purchase it from the website of the Microsoft.
Click Here in case you want to get more information.


In case if you have any more trouble do contact back in Fixya.
Thank you

eMachines T... | Answered on Aug 12, 2012 | 18 views



Test all power and data leads that attach to your hard drive IDE,SATA
the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have secure dust free connections and are not faulty or just replace them they could be faulty

motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail


make sure all leads that are attached to your drives dvd\cd floppy have secure dust free connections and are not faulty or just replace them they could be faulty a computer needs



power and data to travel through every working device and to continue its cycle and have an end so any faulty leads will end up with a computer error



even something as small as a faulty power lead or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly



make sure ram modules and cmos batteries have dust free secure seatings and cmos battery has charge some motherboards cmos batteries are soldered in



you might not have enough computer ram

not having enough computer ram will run your computer over its limits putting to much strain on the CPU central processing unit and can cause memory dumps



you might have to many programs trying to or accessing the internet at the same time
scroll to bottom toolbar (bottom of screen) right click select task manager

applications you will see whats running
if you see anything you dont need running select end now and you might uninstall that specific

program if you or computer does not require it to run and
some unnecessary programs that could be jamming up your computer

also under processes see what is ticking over in the background again if you see something you
dont need to be and users you will see who is using your computer

you might need to add more computer ram
if you're not sure if a module is right for your system use the

Crucial Memory Advisor tool for a list of guaranteed compatible modules. first you will need to select the manufacturer from a drop down list then select your product line

from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system
you should always ask for a guarantee on the compatibility of the ram before making any purchase



might be getting hot

check you CPU make sure its securely seated and has thermal grease

http://www.hardwaresecrets.com/article/Thermal-Compound-Roundup-February-2012/1490


hope this helps

eMachines T... | Answered on Aug 10, 2012 | 75 views


A good way to tell is disconnect your hard drive's, & CD/DVD ROM's power & data cable. Try to boot.

If you get the same results then you can try & remove any PCI cards from the board, remove your ram stick. Try to boot. If you get an error beep because you are missing ram than this is good.

Replace 1 ram stick back into your motherboard & try again. If it boots then you know the other stick is bad.

If removing all the non-essentials from your motherboard doesn't work then all you have left are the motherboard & power supply. A simply power supply tester or spare power supply will tell you if it is your board or not.

eMachines T... | Answered on Jul 16, 2012 | 119 views


contact you ISP internet service provider they should be able to supply you one free of charge depending on your current contract and if the modem is broken they will be able to check it online for you

hope this helps

eMachines T... | Answered on Jul 10, 2012 | 146 views


Get onlineand got to www.google.com In the google search box type: "eMachineSupport" or "Gateway" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operatingsystem when requested. Download and install the drivers.You can also try Driver Guidehttp://www.driverguide.com

eMachines T... | Answered on May 06, 2012 | 33 views


Hello good day, just remove your SATA cable from your hard disk if your using a SATA type HARD DISK, change with a new one, or try to pull it back and put it back tightly. It's just a loss contact situation.That's why you are receiving that message.

eMachines T... | Answered on Mar 15, 2012 | 84 views


Check your sound card in the Device Manager

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

eMachines T... | Answered on Feb 19, 2012 | 133 views


See http://www.manualowl.com/m/eMachines/T6528/Manual/119527 which is the manual for your eMachines T6528 system and has information on replacing hardware components including disk drives.

eMachines T... | Answered on Dec 31, 2011 | 202 views


You should try to boot in safe mode without the card removed..If this got on after an update it is possible (almost sure) it messed up with your graphic card driver and now it needs to be reinstalled > To do so ..try to boot in safe mode...To do that press the key indicated on screen for boot menu and choose safe mode ...usually it is f8 key or f12 ..depend on the model .If it seams not to be able to find the safe mode boot ..try to stop the computer by unplugging it ..This will force it to stop improper way ..and will show the screen for safe mode and other ways to boot-up .select the first safe mode ..and let it start ..This mode will not load any drivers and work just with the minimum needed for to start .Go to control panel ...remove programs ..and remove the graphic card driver from the list ..after that if you have the disk insert it and run the driver again in original ..If you do not have it look for it on the manufacturer's site ..and download it ..
If you need help with the driver ..let me know exact model of the computer ..and if it is not an on board card I need to know the exact model of the video card ..

eMachines T... | Answered on Dec 30, 2011 | 188 views


test all leads that attach to your hard drive including electrical extensions SATA / IDE

the leads from your ((motherboard to your hard drive)) make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty


make sure all leads that are attached to your drives dvd\cd have secure connections and are not faulty or just replace them they could be faulty


even something as small as an electrical extension or a faulty fan lead can cause you problems computer needs all of the data and power to travel through every working device and to have an end for a computer to be able work properly


a motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive check all electrical extensions make sure they are securely seated even the cd/dvd drives need to have current go through make sure these devices are working

might be getting hot

check the CPU make sure it has thermal paste and dust free secure seating


also check your computer ram modules and cmos battery make sure they are dust free and securely seated some motherboards cmos batteries are soldered in


hope this helps

eMachines T... | Answered on Dec 16, 2011 | 47 views


dry erase??never heard of this expression before ,if its what i suspect that formatted the hard drive and re-installed the windows programme then yes you will need the original boot up disk to install the sound drivers .

eMachines T... | Answered on Dec 02, 2011 | 45 views


Make sure your installing the right windows either 32 or 64 bit windows.you can't install a 64 bit system on a 32 bit if it doesn't support it.

eMachines... | Answered on Oct 26, 2019 | 46 views


microsoft has a license type called OEM which detects the computer that it is installed on and some computers have the licence key stored in the bios of the computer.
So when you grab the old hard drive and put it in the next computer Windows will detect you changed computers and not run as per OEM licensing rules that it runs on only the original purchased computer.
You might be able to run the drive as a secondary drive but you would need to install a new windows operating system and hard drive. And then use a partioning program to make the secondary drive not an active drive.
also you new machine most likely has a different type of bios called EFI
and you would have to change its settings to run AMI Bios but I do not think that is your problem as I think it is OEM but it might be worth investigating if you can run a legacy bios in the bios settings.

eMachines... | Answered on Oct 05, 2019 | 20 views


Hi there. If your desktop has been overheating for any reason you will need to look at buying a new processor (cpu), power supply (if wires have been damaged from heat or voltage spike), or possibly a new motherboard. It would be advisable to have a computer shop look at the internal components of your desktop. Heat or a surge in power can damage the computer hardware. Good luck!

eMachines... | Answered on Apr 09, 2019 | 37 views


hello and good morning.
emachines are old and now owned by acer.com (gateway,etc)
they OWN many old names.
you are running XP right? the last man on earth to do so?

XP is a virus magnet and doomed, it is time to upgrade.
this PC is 2007 made. so is 12 years old, today..
the RTC coin cell battery will be no good now, replace it for $2
then reset BIOS inside BIOS screen " set default"
then test the HDD, to be sure it is ok, if not? then reloading any OS of any kinds is not going to work with any bad HDD.
Last, reload a new OS.
there are the steps. and can be expensive, spent on any PC this old with zero street value. ($0 if broken a it is)

eMachines... | Answered on Apr 01, 2019 | 31 views


http://www.emachines.com/ec/en/US/content/drivers.html

eMachines... | Answered on Mar 02, 2019 | 31 views


Examine the rear panel carefully to find it.

eMachines... | Answered on Feb 02, 2019 | 39 views


You'll have to unsolder the entire battery holder and replace it with a new one. Not suggesting you try it unless you have the proper desoldering equipment. Otherwise, damage to the motherboard will result

eMachines... | Answered on Nov 04, 2018 | 44 views

Not finding what you are looking for?
eMachines T6534 PC Desktop Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...