20 Most Recent eMachines W3115 PC Desktop - Page 8 Questions & Answers

Go into the control panel, find the device manager, and then find the touch pad in the list. Right click on it and select enable. Or Function key (FN) + F7 should enable the touch pad. Let me know if this helps, Sincerely, Hunter Quinn IBM Help Desk

dear you check the setting of your monitor.

Reload the OS and start over

This is usually a sign that the partition on your hard drive that the recovery media is located in is corrupt. 3 reasons for this:

1. bad recovery partition from the factory (bad image)
2. Virus or spyware corrupted files to prevent usage which would prevent you from removing the problem with a recovery.
3. Hard Drive issues (physical sections of the drive going bad.)

If you created recovery media, use those to recover your system. If you didn't, you may have to purchase recovery media from gateway for your model to recover the computer. While it may cost you $30 to $50 dollars for the recovery media, it is a lot cheaper than the alternative of getting a tech to try to repair the partition or track down the virus or spyware. The other advantage of recovery media is if the problems you were experiencing are hard drive related, you can put a replacement drive in and use those recovery disks to get your system working again.

http://www.computerhope.com/issues/ch000235.htm read this please ......

There is no video output from your computer, that is why the monitor goes to sleep, check the cable and the video card.

It sounds like you are trying to do an upgrade to Windows 7, as normally the operating system comes pre-installed on the Hard Drive (HDD). If the hard drive is not recognised, then it is a hardware fault, take it back it where you bought it! If that is not possible, check that it is correctly fitted to the hard drive socket, otherwise it is back to a repairer.

Usually 3 or 4 beeps in a row on many systems is a RAM issue. If you have multiple RAM sticks try to remove one while the system if off and unplugged. Turn it on and see if the beeps continue. If so, remove the other ram stick and put back in the first stick you removed. Repeat the process for each stick of ram until the beeping stops. If it stops, this means you have found the bad ram module and can replace it. Some computers requires ram to be installed in pairs, and that the pairs match (Check the stickers on the ram to ensure both are the same type and speed) If the problem continues after removing and testing each stick of ram, you may want to have a service professional / Computer Repair shop take a look at the computer for further testing.

Follow the instruction from the link below: https://support.google.com/chrome/answer/113910

Hash key location will depend on language you're set up for. My keyboard has the hash on a shifted "3". "#"

Once black "highlighted" press enter.Options to enable or disable will appear.

Apparently, The motherboard for the t2984 is a SEABREEZE T3 according to the eMachines Parts Depot... http://hardforum.com/showthread.php?t=1089862

1. Password incorect- try to key in another one. 2. Caps Lock is ON or OFF. Try to remember is there any CAPITAL letters involved. 3. For God's sake stop spying on your fiance, and leave her(his) computer alone! :D

try not calling people who may help you idiots, you're not likely to get any meaningful help from strangers by being rude. And change from AOL. your kids are right. use gmail instead. If you really want password help regarding AOL email you need to contact the only people who can help - AOL. try 1-800-827-6364 for USA or 0844 499 5555 for UK

Which power button is flickering (your computer, or your monitor). Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.

See this... https://www.youtube.com/watch?v=dYNTEH7PwgA

Check all connections. Here's some tricks I would try... 1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor. 2. Verify the monitor cable is firmly connected to the computer and the monitor. 3. Verify that you have turned the monitor power switch on. 4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works). 5. If the power light on the monitor is not on, try a different power cord. 6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced. 7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers. Good luck.

reformat your hard drive and put a fresh copy of windows on it is easiest to do

the function key should have Fn on it or something of the like to identify it as the function key