20 Most Recent eMachines W3507 PC Desktop - Page 3 Questions & Answers

go to this site, select your model and download the video drivers:



http://www.e4me.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3508 I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

go to this site, choose your model, then download and install the video driver:


http://www.e4me.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T3508 I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Update the drivers to the correct card .

if your pc does not have audio there are usally only two reasons 1) bad sound driver 2) BAD sound card. youcan go to the manufacturers web site to download the latest driver for your machine if that doesnt work try windows update. Sometimes Windows update has hardware updates.If that fails buy a new sound card.

Here are the tips on how to upgrade and support to you CPU.

The 8400GS isn't much better than the onboard graphics in your Emachines, and the 7200 is NO better than your onboard.

If you want a noticeable improvement in performance, get at least a 9500GT, which is the highest card your Emachines can run on its stock power supply.

Any card more powerful than that, you are going to need a new power supply.

This 9500GT is below $50: http://www.tigerdirect.com/applications/…


RAM Memory Upgrades
1 GB 240 Pin DDR-2 667MHz (PC2-5400) 512MB 240 Pin DDR-2 667MHz (PC2-5400)

Hope this helps.

Please rate me if i am helpful to you.
Thank you.

Yboyandrei

Try reformating Windows. If you have info on your computer that you need, you can alwats try to repair your computer from safe mode.

Hello. Try this link. http://support.gateway.com/support/drivers/search.asp?ref=step&st=browse&platform=10021&model=12306&os=10406&type=10095 Let me know if it workd

Your system comes stock with one stick of DDR2 (512 MB), which means that it is _ not_ dual channel DDR2 memory as dual channel DDR2 must be installed in matched pairs. Try to exchange the new memory for 2G of some single channel DDR2.

Does not seem to be one available,art least not from the website.
Have you tried a restore to the earliest date? There is a contact phone number on theire website. Another option is to purchase an Win Xp disk.

http://www.emachines.com/support/product_support.html?cat=Desktops&subcat=W%20Series&model=W3507

The manual is at... http://www.manualslib.com/manual/46776/Emachines-13.html?page=4&term=panel&selected=0 See page 46 "Removing the side panel".

What's plugged into it?

Your desktop computer does not have a wireless adapter.

Looks promising. It's an INF fie which are driver files. Download, extract, and direct Device Manager where to install driver from. The worst that can happen is it won't install, or you have uninstall / delete. Better than those fake drivers you mentioned.

Check cables, connections, pins, If you have a Graphics Card, reseat it. Sound like a connection or graphics issue. Do you have a can of Electronic's Contact Spray? I use it for cleaning connector, PCI slots, etc., Where copper connections oxidation occurs. May be a simple reset or bad Graphic Card. Hard to say for sure.

Did you check W7 compatibility before install? It is likely that your low-end RAM-based graphics was a bust.

Purchase MS Office online or a local vendor. Check it out.http://office.microsoft.com/en-us/buy/office-2010-which-suite-is-right-for-you-FX101825640.aspx

1) you must sure the Internet is working o.k 2) see if the modem LEDS are working good3) if you have Router see if the router is working with the LEDS, and see you have another computer connect and see if working.4) if additional computer is working the problem will be your computer PC.5) try to restore to some point when was working before.6) see if this work, otherwise you must download the driver for NIC NETWORk , BIOS+CHIPSET go to the supplier web and download.God bless you

i assumed your os is window xp....try this steps;1. right click on my computer, left click on the properties2. select the advanced tab, under performance click settings3. on the advanced tab, under virtual memory click change4. Under Drive [Volume Label], click the drive you want to change5. Under paging file size for selected drive, select the custom size6. type 384 in the initial size (mb) text box7. click set and then ok 8. close the dialog and restart i hope this help.

We had a problem like this with one of our PCs and it was a very nasty virus that needed specialist help, they had to reload all the software. Suggest you get access to another PC and find out if it is a virus. Sorry!

I would look inside at the power supply IF you can get to that for puffed up caps---if found you can either replace them (seen some with several bad) or look for a generic replacement power supply.Usually here it will begin by being hard to turn on at first but once on will operate--sooner or later it will not come on at all.