20 Most Recent eMachines T3616 Desktop PC - Page 7 Questions & Answers

0helpful
2answers

Wher can I get amotherboard manual

The only time a motherboard manual is provided to the user if when the you:
    • Build the machine yourself and purchase the motherboard outright
    • Have a machine custom-built by a local computer shop.
PC manufacturers usually purchase customized versions of commercially available motherboards for the machines. They specify chipset parameters and BIOS contents specific to the build(s) they plan to create. Because of that, it is not usually possible to obtain a motherboard manual for such machines.
3/19/2015 7:22:17 PM • eMachines... • Answered on Mar 19, 2015
0helpful
1answer

Why is youtube buffering so slow on my laptop it's not the internet

Check your wired or wireless connection speed. You may need to increase the amount of available memory for the software to enhance the application buffering.
3/17/2015 12:06:51 AM • eMachines... • Answered on Mar 17, 2015
0helpful
1answer

How do I replace the fan in an EMachines PC Model EL1200-07w?

Try cleaning it first with canned compressed air they get dust built up in and sometimes won't run...do not run system with fan not working could overheat...try that...works most times
3/3/2015 8:31:11 PM • eMachines... • Answered on Mar 03, 2015
0helpful
1answer

How to reset bios password emachines d735 series?

I think you mean D725, not D735. I don't think that there is an eMachine D735 model. The D725 series is a laptop. Unfortunately, there is no easy solution. You will need to open the laptop, if you know how to do the reset. First disconnect your machine from power; this is an important step (otherwise the next step won't work); then open the laptop. Be very careful not to cause damage with static electricity from your body. After you open it, remove the CMOS battery for 20 to 30 minutes. That will make the motherboard forget all the CMOS settings. Reinstall the battery and try to boot-up. There used to be a software utility toolkit to reset the BIOS password, but it has now disappeared from the Internet because it could easily be used for illegal purposes. I hope this helps a little bit.
3/2/2015 10:08:19 PM • eMachines... • Answered on Mar 02, 2015
0helpful
2answers

Laptop won't boot says check cable connection no bootable device

that means it cant find the harddrive and there's nothing to boot from in the dvd drive.
2/28/2015 3:22:37 AM • eMachines... • Answered on Feb 28, 2015
0helpful
1answer

Emachine model eLl360g what to do went at halt state what steps do i take to get back to password starting screen

Possible bad hard drive, replace and reload OS.
2/14/2015 6:46:28 AM • eMachines... • Answered on Feb 14, 2015
0helpful
1answer

Want question mark back key only gives me the french e

Change the keyboard setup under the control panel.
2/9/2015 10:56:42 PM • eMachines... • Answered on Feb 09, 2015
0helpful
1answer

Emachines desktop won't go past windows can not complete insulation in safe mode restart, when I do it says the same thing again

If you have the original Windows CD, put it in the drive and try to boot to the disc. Each computer is different so there will be different methods to achieve this, but if you don't see a prompt to boot to the CD try tapping tab or F8 to see what other options you have for boot order. If you can boot to CD, see if you can repair your startup, or run a check disk (depending on what version of Windows you're running). If you can give some more detail I can probably help you out better as to what you need to try. Best of luck!
1/29/2015 3:06:35 AM • eMachines... • Answered on Jan 29, 2015
0helpful
1answer

Question mark symbol

Use you keyboard . Press Shift and ?/ button together.
1/25/2015 7:08:36 AM • eMachines... • Answered on Jan 25, 2015
0helpful
1answer

How to read my email

There are many ways to read a email
  1. use internet browser like chrome , internet Explorer , safari and Firefox. Type URL in the address bar. Provide username and password. Click on the mail and read it.
  2. Use any e-mail client software like outlook or incredible mail . Configure it accordingly and read you e mails.
1/25/2015 7:02:20 AM • eMachines... • Answered on Jan 25, 2015
0helpful
1answer

My emachines W3052 desktop won't start but powers cpu fan and the hard drive light is steady on

Hi there Andrew, we could really do with more information, such as. Has the pc been modified since you have had it ? upgraded, been seen by a technician etc, if not, and you can do this, I would suggest trying a power supply for test, but make sure it exceeds your system requirements. i.e if your current psu says 250 watts do not choose a supply less than 250 watts, make it the same or a higher wattage.
1/11/2015 11:00:44 PM • eMachines... • Answered on Jan 11, 2015
0helpful
1answer

How to set up wireless network on windows XP home edition?

OK-- are you talking about simply connecting one computer to a home network, or setting up wireless network in general? If there is a wireless adapter in the PC and you already have a wireless network, the adapter will list all the networks in your proximity, and you choose yours. I can go into greater detail with that when I see your response. Thanks
1/11/2015 5:24:38 AM • eMachines... • Answered on Jan 11, 2015
0helpful
1answer

How can you check a computer power supply.

che cheapest tool that can effectively test a power supply is by trying a known spare power supply in its place. the cpu demands very precise voltage changes, wqhich would boggle a voltometer
1/3/2015 2:44:31 AM • eMachines... • Answered on Jan 03, 2015
0helpful
1answer

I have a emachines model t6524 and the wires that ture the power on in the front cam unpluged there are 6 red 7bk blu7bkbk7whit

25126336-cyh1nhlz3nmhmciytcwjnjrb-4-0.jpg 25126336-cyh1nhlz3nmhmciytcwjnjrb-4-1.gif it will look something like the above. this motherboard is often used in your model
1/3/2015 2:31:53 AM • eMachines... • Answered on Jan 03, 2015
0helpful
1answer

Im using emachines n 214... touchpad is not working why?

Go into the control panel, find the deviceicon1.png manager, and then find the touch pad in the list. Right click on it and select enable. Or Function key (FN) + F7 should enable the touch pad. Let me know if this helps, Sincerely, Hunter Quinn IBM Help Desk
12/4/2014 4:56:23 PM • eMachines... • Answered on Dec 04, 2014
0helpful
1answer

I have a model 700G monitor and it takes a long time to come on when I start computer in the morning

dear you check the setting of your monitor.
10/21/2014 12:27:20 PM • eMachines... • Answered on Oct 21, 2014
0helpful
1answer

Cant remember my password to login my desktop

Reload the OS and start over
10/7/2014 12:15:48 AM • eMachines... • Answered on Oct 07, 2014
0helpful
1answer

Trying to restore emachine to factory settings.. When I go to emachines recovcery management, I get something saying "Empowering Technology is not ready. try again Later"

This is usually a sign that the partition on your hard drive that the recovery media is located in is corrupt. 3 reasons for this:
  1. bad recovery partition from the factory (bad image)
  2. Virus or spyware corrupted files to prevent usage which would prevent you from removing the problem with a recovery.
  3. Hard Drive issues (physical sections of the drive going bad.)
If you created recovery media, use those to recover your system. If you didn't, you may have to purchase recovery media from gateway for your model to recover the computer. While it may cost you $30 to $50 dollars for the recovery media, it is a lot cheaper than the alternative of getting a tech to try to repair the partition or track down the virus or spyware. The other advantage of recovery media is if the problems you were experiencing are hard drive related, you can put a replacement drive in and use those recovery disks to get your system working again.
10/1/2014 3:02:51 PM • eMachines... • Answered on Oct 01, 2014
Not finding what you are looking for?
eMachines T3616 Desktop PC Logo

Popular Tags

14 questions posted

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

Andrew Chrostek
Andrew Chrostek

Level 1 Expert

187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

T eMachines

  • T eMachines

Most Popular Question

computer stuck in configuring updates

  • Computers & Internet
Loading...