Toshiba Satellite Pro L300 Notebook - Answered Questions & Fixed issues
How do play dvd,s
Hello
OK, the link below will give you step by step instructions on how to play DVD's using your laptop. The link below will explain for Windows XP, if you have another operating system, you should be able to follow similar steps.
Click
HERE.
Kind regards
Andrea
3/10/2020 3:25:27 AM •
Toshiba...
•
Answered
on Mar 10, 2020
•
102 views
Toshiba Satellite 300-13n ( model # -
Using device manager uninstall, reboot and reinstall the wi fi chip. If this does not work you are in deep doo doo because the chip is fubar. I had the same issue with a Toshiba laptop but I returned it since it was a few days old. The chip is soldered to mo bo and unless you have real special tools and skills it cannot be removed.
9/18/2017 5:01:38 PM •
Toshiba...
•
Answered
on Sep 18, 2017
•
112 views
My laptop randomly pushes buttons from my
If it is still within warranty, then take it back to the store. If not, you are better off finding a tech savvy person and have that person take the computer keyboard apart and clean it properly so the keys don't stick and actually lets go.
If you have spilled anything sticky in it or used it with sticky fingers, it will most likely be the reasons for it to happen and in that case you have voided the warranty.
7/16/2017 6:10:17 PM •
Toshiba...
•
Answered
on Jul 16, 2017
•
77 views
What do I need and how do I connect my Toshiba
I dont believe that laptop has an HDMI port on it. If you have an LCD TV then your TV may have a VGA or DVI input on it. You can connect your laptop to the TV by using a VGA to VGA or VGA to DVI cable. If you your TV doesn't have one of these input ports, then you're not going to get your laptop connected to your TV.
11/20/2016 8:56:02 AM •
Toshiba...
•
Answered
on Nov 20, 2016
•
553 views
I want to change the operating system wimdows
You have 2 options (purchase)
1. upgrade the win vista to win 7 - you need to check the type of win vista that you have if it is 32 or 64 bit or
HOME BASIC
HOME PREMIUM
PROFESSIONAL
ULTIMATE
home basic is not win 7 upgrade supported.
2. Win 7 OS full version disk.
Back up all of your files before doing anything on your computer.
1/26/2016 5:43:29 AM •
Toshiba...
•
Answered
on Jan 26, 2016
•
275 views
I have a satalite 300
Hi,
try using ActiveBoot suite v5.0.5, when turnig on your computer. This program will scan your computer and show u all the errors,missing files, wrong dll,...and repair them. It worked very well for me as I had a TROJAN virus on my Toshiba satellite 300 and couldn't even boot anymore.
After that try use the RegistryBooster tool witch solves every windows problems.
I hope this will help. Good luck :)
5/13/2015 2:23:19 AM •
Toshiba...
•
Answered
on May 13, 2015
•
326 views
What is mean by hint when change password?
Thats if you wantto give yourself a "hint, or "clue" in case you forget your password. say your password is "dog" as a hint, you would put "treat" so when you hear the hint, then you will be able to remember your password. :)
2/23/2015 5:11:48 PM •
Toshiba...
•
Answered
on Feb 23, 2015
•
128 views
No mouse control via wireless mouse, or touch pad
IT SOUNDS LIKE YOU HAVE MAY HAVE DRIVERS OR IRQ THAT ARE CONFLICTING, TRY UNINSTALLING THE DRIVERS FOR YOUR WIRELESS MOUSE, AND REINSTALLING THEM, MAKE SURE THE WIRELESS MOUSE IS UNHOOKED BEFORE YOU REINSTALL THE DRIVERS.
2/17/2015 2:26:45 PM •
Toshiba...
•
Answered
on Feb 17, 2015
•
434 views
Zlob virus
I found this on the net, i hope this helps you out. It also says that this nasty virus is a tough one...and you still run the risk of ruining your info on the hard drive. Back-up critical info (Docs,Music, Game info etc)
And keep me posted on the results..i hope this helps you out! GOOD LUCK! 8-)
Step 1 : Use Windows File Search Tool to Find Zlob Path
- Go to Start > Search > All Files or Folders.
- In the "All or part of the the file name" section, type in "Zlob" file name(s).
- To get better results, select "Look in: Local Hard Drives" or "Look in: My Computer" and then click "Search" button.
- When Windows finishes your search, hover over the "In Folder" of "Zlob",
highlight the file and copy/paste the path into the address bar. Save the file's path on your clipboard because
you'll need the file path to delete Zlob in the following manual removal steps.
Step 2 : Use Windows Task Manager to Remove Zlob Processes
- To open the Windows Task Manager, use the combination of CTRL+ALT+DEL or CTRL+SHIFT+ESC.
- Click on the "Image Name" button to search for "Zlob" process by name.
- Select the "Zlob" process and click on the "End Process" button to kill it.
- Remove the "Zlob" processes files:
-
msmsgs.exe
nvctrl.exe
msmsgs.exe
nvctrl.exe
Read more about How to kill Zlob Processes
Step 3 : Use Registry Editor to Remove Zlob Registry Values
- To open the Registry Editor, go to Start > Run > type regedit and then press the "OK" button.
- Locate and delete the entry or entries whose data value (in the rightmost column) is the spyware file(s) detected earlier.
- To delete "Zlob" value, right-click on it and select the "Delete" option.
- Locate and delete "Zlob" registry entries:
-
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsNTCurrentVersionWinlogonShell=explorer.exe
HKEY_LOCAL_MACHINE
SoftwareMicrosoftWindows NT CurrentVersionWinlogonShell=explorer.exe,
msmsgs.exeHKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionRunRegSvr32=%System%msmsgs.exe
HKEY_LOCAL_MACHINE
SoftwareMicrosoftWindows CurrentVersionRunRegSvr32=%System%msmsgs.exe
Read more about How to Remove Zlob Registry Entries
Step 4 : Use Windows Command Prompt to Unregister Zlob DLL Files
- To open the Windows Command Prompt, go to Start > Run > type cmd and then click the "OK" button.
- Type "cd" in order to change the current directory, press the "space" button, enter the full path to where you believe the Zlob DLL file is located
and press the "Enter" button on your keyboard. If you don't know where Zlob DLL file is located, use the "dir" command to display the directory's contents.
- To unregister "Zlob" DLL file, type in the exact directory path + "regsvr32 /u" + [DLL_NAME] (for example, :C\Spyware-folder\> regsvr32 /u Zlob.dll) and press the "Enter" button.
A message will pop up that says you successfully unregistered the file.
- Search and unregister "Zlob" DLL files:
-
uimcu.dll
antzozc.dll
dtjby.dll
Step 5 : Detect and Delete Other Zlob Files
- To open the Windows Command Prompt, go to Start > Run > type cmd and then press the "OK" button.
- Type in "dir /A name_of_the_folder" (for example, C:\Spyware-folder), which will display the folder's content even the hidden files.
- To change directory, type in "cd name_of_the_folder".
- Once you have the file you're looking for type in "del name_of_the_file".
- To delete a file in folder, type in "del name_of_the_file".
- To delete the entire folder, type in "rmdir /S name_of_the_folder".
- Select the "Zlob" process and click on the "End Process" button to kill it.
- Remove the "Zlob" processes files:
-
uimcu.dll
antzozc.dll
dtjby.dll
dumpserv.com
zxserv0.com
vnp7s.net
Protect
RSA
ncompat.tlb
msvol.tlb
hp[X].tmp
msmsgs.exe
nvctrl.exe
dumpserv.com
zxserv0.com
vnp7s.net
%UserProfile%\Application Data\Microsoft\Protect
%UserProfile%\Application Data\Microsoft\Crypto\RSA
ncompat.tlb
msvol.tlb
hp[X].tmp
1/7/2015 9:16:46 AM •
Toshiba...
•
Answered
on Jan 07, 2015
•
342 views
Not finding what you are looking for?