20 Most Recent Samsung NC10-14GW Notebook - Page 4 Questions & Answers

The most likely cause is you've recently installed some hardware or software, and upon restarting, the computer didn't know how to handle it. Not to worry, there are several options that often solve this type of problem. Disconnect any hardware you recently installed, such as a sound card. It could be causing the issue. The hardware may be defective or your computer may not have the capability to use it. Start the computer and wait for the Desktop to show up. If the Desktop appears to be just seconds away from showing up but never does, hold down the Ctrl-Alt-Del key combination. In the menu that pops up, choose "Start Task Manager." Select any task you see in the "Application" tab and choose "End task." This may allow the computer to finish loading. Restart the computer if the problem persists. When starting, hold down the F8 key to get a list of startup options. Select the option for "Last Known Good Configuration." Let Windows boot up. If this doesn't work, restart and choose "Advanced Boot Menu" and then "Safe Mode." Let Windows load. If either solution works, go to the Control Panel and choose "Uninstall a program." Select the last thing you installed and choose "Uninstall." Attempt to repair Windows. This may be your last option if nothing else works. Insert the Windows DVD and restart the computer. When the computer restarts, press any key to boot from the DVD. At the first menu choose your language and country and click "Next." Choose the "Repair your computer" option. Use the recovery tools option and then "Startup Repair." If this doesn't work, repeat these steps and choose "System Restore" instead of "Startup Repair" and choose a date before you began experiencing the problem. Hope this helps b>

BEST OPTION IS GO TO THE STORE FROM WHERE YOU GOT IT AND DONT TAKE THE RISK OF FIXING IT YOURSELF YOU MAY TURN UP SPOILING IT MORE!!

Sure you can, you have our permission. I assume it's not opening? Have you reboot the machine? shut down, unplug, remove battery ,plug in, reboot. Any change?

DOWNLOAD key belowDOWNLOAD LINK

Si votre mot de passe est un mot de passe Windows, vous mai démarrer en mode sans échec et ouvrez une session en tant qu'administrateur puis retirer le mot de passe puis redémarrez. Le mot de passe aura disparu.

install another operating system

Does it have a cd / dvd ?Restart your computer during the boot process you will see on the screen to press a certain key to enter setup usually the delete or F2 keyPress and hold that key during the boot up process to enter BIOS then using the arrow keys scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart Note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating systemNote after you have loaded the operating system you should go back and change the first boot device to failsafe or optimised defaults after windows has loadedyour computer will automatically restart it might restart 2 times one to finish the installationthe next will be because the operating system is loaded and will boot from your cdHope this helps.

to copy use Ctrl and c. to paste use Ctrl and v

Try to reboot BOTH devices, remove power from Both devices and reboot. I'm not sure what a ne10 is? The "aquiring network adress" is it's try to aquire the IP address. If you power everthing down it should reset everything. You question isn't very clear. I don't know what "IT' is? "when i try to connect "it" to my web cube "it" just says aquiring network adress how do i get "it" to work properly please"?

Allow 1hour to charge it, if did not charge check the input & output of the charger if its properly insert, if not again off your notebook & charge it, always check if it is charging,
Note: Charging test try on, off, & unuse it allow to full charge the battery before using..avoid low bat your battery when using.

try holding the power button for 30 secs with the battery out and unit powered off it allows a static discharge and might help its what my wifes g60 requires from time to time good luck and hope this helps you out some

Check in the Device manager to see if all the devices are enable and working. The one with a yellow ? against that device requires a driver installation. Is the LAN device OK? Source :Wireless Adapter IF all the above is fine then here the which shows the on off key.5 and 6 is the On and OFF.

Hello, "yuris_closet".Click 'Start' > 'Programs' > 'Accessories' > 'Paint'

You didn't mention by what degree has it rotated, Is it a 90 degree rotation or a complete 180 degree rotation. Anyways here's the solution to your problem.


Hold down Ctrl+ Alt and then press the Up or the Down arrow key to rotate it by 180 degrees.
OR
Hold down Ctrl+ Alt and then press the left or the right arrow key to rotate it by 90 degrees.