Top 20 Motorola Mobility RAZR2 v9 Cell Phone Questions & Answers

The computer may not be able to keep the phone on because it is a trickle charge. Try charging it with the phone off until it reaches 15% and then try to charge it the rest of the way. Using the wall charger is best. Mark Motorola Support

000000

Don't recommend it due to data loss. Try Motorolaigrate to transfer from old Moto to current Moto phone. Mark Motorola Support

Hi, You can unlock a Motorola Razr V9X safer and easier using unlock code. You can get the unlock code for a Motorola Razr V9X from www.wickedunlock.com/motorola-razr2-v9x/rs11wp9/ at affordable cost.

does the razr2 have internet and email facilities

You can get the UNLOCK CODE for Motorola Razr2 V9 at here Classicunlocking.com and Unlock it from network lock.

You can get the Motorola RAZR 2 Subsidy Password at here Mobile-unlocker.com/motorola-razr2-v9/rs2wp9/ AND unlock it FROM 3 Network lock.

You can get the Subsidy Password from Online site,You can get the Subsidy password from the site Mobile-unlocker.com and Unlock it from Network Lock.

You can get the subsidy code from Mobile-unlocker.com .They offer the subsidy codes at cheap price.Through this you can unlock your mobile easily..

it is upto 8gb....

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Default 6 Digit Security code: 000999 or 1122
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved
OR:
If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

The solution is simple. Use a micro USB cable to connect and charge via a Computer or Laptop! Rebel

Hey Ckel3805,Allow me help you with your problem.Press the * (asterisk) key on the bottom right corner of your wife's cellphone once, and you'll snap out of the auto complete mode. Rebel

Hey Dennis, In order to get the settings you'll have to contact your operator. Once you do so, you'll be sent what we call a 'system message'. Accept it, and save it. Once you do so, you're phone GPRS/MMS system settings will be updated as to your current carrier. That should do it for you. Regards,Rebel

Hey Malcolm, It's because your cell phone is discharged! Regards,Rebel

You can get the subsidy unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

you can try unlocking your phone through codes. its the safe way to unlock your phone. because when you unlock your phone through software or hardware there are possibilities for data getting corrupted or lost. but there is no such possibilities when you unlock through codes. thats y i prefer this method to unlock my phone. i got the codes from this site Theunlockarena.com to unlock my phone.

Go to user profile, cliq on general then personalize it and choose any ring tone that you want, after choosing the tone cliq on activate to activate it.

You can simply send them to your email. If this isn't accessible, then you can wait for more answers regarding bluetooth transfer or a data cable, which most likely requires you to download manufacturer software.

actually they are.. but you need an expert person to do the replacing since your phone is flex driven and has two lcds and boards which is not easy to transfer to other casing.