Top 20 Fossil Philippe Starck PH1035 Wrist Watch Questions & Answers


Take your watch to a jeweler to identify type and possibly replace it.

Fossil Philippe... | 39 views | 0 helpful votes


Google (fossil)(PH1035)(manual) without parens for setting instructions.

Fossil Philippe... | 50 views | 0 helpful votes


i have 20 brand new and cant find any info on them.

Fossil Philippe... | 102 views | 0 helpful votes


The anticipation for a new gadget can often be more exciting than getting the actual product in your hands. Apple's new iPad definitely offers some nice updates with the Retina display, 4G and improved camera, but is it a worthy upgrade for someone that already has an iPad 2? Janet, Dave and I are here to give you our take on Apple's latest tablet.

If you've been hanging around The Gadgeteer for awhile, you know that we post occasional dual author reviews that offer two sides/opinions to a product. This time we're adding one more voice for a trio review. Janet and I have experience with all 3 iPads, but Dave upgraded from the original iPad. He also lives in an area with 4G coverage, so he's able to tell us what it's like to use the new iPad 4G enabled on the road.

My comments will be in Black, Janet's will be in Blue italics and Dave's will be in Red bold.

Fossil Philippe... | 243 views | 0 helpful votes


You can get instructions for your watch from the Fossil web site.

Go to "fossil.com", go to the bottom of the page and you will see a
menu, click on "customer care", and then look under "Product Info" on
the left and you will see "watch instructions"

Click on this and a list of diagrams and watch descriptions will appear. Put
your cursor over any of the descriptions and a diagram of the watch face will
appear. Search the list until yours appears and download.

Fossil Philippe... | 700 views | 0 helpful votes


Hi. I´ve got one of these watch. I just got the same problem. You just have to press all four botoms at the same time. That`s it.

Fossil Philippe... | 415 views | 1 helpful votes


Hi. I´ve got a ph-1030 and it works with a `RENATA 350`. I couldn`t d this reference so I bought a similar one.I got the `SR1130W` . This battery works but you have to place an small tape on the back (negative pole), to insolate the battery. You have to do it because this battery is a litle bite smaller than the renata 350. If you need anything else email to crbernal@hotmail.com

Fossil Philippe... | 1,212 views | 3 helpful votes


see a rep for this ...

Fossil Philippe... | 128 views | 0 helpful votes


Philleo Stark are made by Fossil.<br /> <br /> Go to <a href="http://www.fossil.com/en_US/shop/customer_care/static/fossil-customercare.html">http://www.fossil.com/en_US/shop/customer_care/static/fossil-customercare.html</a> and you will see "watch instructions", ckick on this for download of the instructions. They are generic instructions, so you need to scroll down to find the one that looks like yours and download the file.

Fossil Philippe... | 419 views | 1 helpful votes


At a watch store or Jewelry counter in most department stores.

Fossil Philippe... | 535 views | 0 helpful votes


Go to http://www.fossil.com/en_US/shop/customer_care/static/fossil-Instructions.html and you will find a list of generic instructions in which you should be able to find a set that suit your watch.

Good luck!

Fossil Philippe... | 1,981 views | 4 helpful votes


You can get instructions by copying "http://www.fossil.com/en_US/shop/customer_care/static/fossil-Instructions.html" into your search engine and scrolling down the page to find Stark watches.

Choose the one that matches your watch and download.

Fossil Philippe... | 576 views | 1 helpful votes


Follow this link: http://www.fossil.com/webapp/wcs/stores/servlet/Static____Instructions_custCareNav Scroll down and find Philippe Stark watches, then click on appropriate watch. Rate me, plz.

Fossil Philippe... | 637 views | 1 helpful votes


It probably needs a new battery.


Take your watch to your nearest watch shop and ask them to do it for you.

You can get into difficulty replacing batteries and it is not worth the risk for the small cost saving.

Fossil Philippe... | 145 views | 0 helpful votes


You may or may not have arrows inside bracelet. Arrows are pointing the way the pins must come out.
First you have to find out what sort of pins or even screws are used to keep links together.
Examine both bracelet sides and find the side where pin ends have a groove.
Start with a tiny screwdriver and unscrew one of the screws. If it turns, but doesn't come out, that means you have a pins instead.
For removing pins the best would be pin removing tool (approx.5GBP on ebay), but it's possible to do the job without it.
Take a hardened steel needle and blunt the sharp end to the approx. size of pin end diameter using any sharpening stone or sandpaper. Get an old towel and fold it to make a soft base for work (like small cusion). As you don't have a special bracelet holder you will need a pair of helping hands to hold the bracelet steady upright. You will need small hammer and pair of flat nose pliers as well.
NOTE: The pins MUST be driven split end out first, not vice versa. Make sure that the grooved pin ends are facing towel, not the needle and hammer!!!
Now place the watch on the folded towel, take that needle and smallest hammer you have and start driving the pin out using light blows. Do Not hit hard, as you will brake the needle, scratch your watch or even injure yourself. Watchmakers are using 45 gram hammer, so, calculate your strength of blows.
After a few blows check if the split end is coming out and when you see that the end is long enough to grab it with pliers, pull the pin out with pliers. When pulling, do NOT turn pliers, as pins tend to brake when twisted. Use firm grip and your strength to pull the pin without twisting.
After shortening the bracelet or adding extra link(s) make sure that the pins go back EXACTLY the same way as they came out- the blunt end first in the hole and the split (grooved) end last. Before doing that check remaining pins in bracelet to make sure that you put them back from the right side of bracelet.
It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old toothbrush handle (or some plastic item) as an absorber. Simply put pin into the hole as deep as you can with your fingers, put the toothbrush handle on split pin end and hit handle, not the pin.
Make sure that pin ends are flush with bracelet. If needed- hit few more times.
Job done!
If you do not want to do it yourself, any jeweler will do it in a matter of few minutes.
Don't forget to rate, please.

Fossil Philippe... | 963 views | 10 helpful votes


can you check on web site

Fossil Philippe... | 2,745 views | 0 helpful votes


Every battery replacement includes watch reset as well. If it was not done properly by watchmaker, then you are eligible for full refund and even can ask to fix the watch, as it was in working order before you gave it to jeweller.
This will not solve the problem, but at least it will make you feel better.
Next time you need the battery replacement, find the nearest watchmakers shop - not the jeweller. They are usually under one roof, but the trades are completely different and no jeweller can do the watchmakers job, as this takes years of learning and training.
Do not forget to rate, please.

Fossil Philippe... | 334 views | 1 helpful votes

Not finding what you are looking for?
Fossil Philippe Starck PH1035 Wrist Watch Logo

79 questions posted

Ask a Question

Usually answered in minutes!

Top Fossil Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Ray Murphy

Level 2 Expert

68 Answers

john h

Level 3 Expert

22486 Answers

Are you a Fossil Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fossil Watches

  • Fossil Watches

Most Popular Question

just replaced battery

  • Watches
Loading...