Top 20 Fossil AM3784 Wrist Watch Questions & Answers

Thanks for contacting Fossil.
The only way to know the battery size is to pull out the old one. It might also be in your manual. It might be on the outside of the watch.
If battery is missing, then you will have to measure the cavity and match it against a battery chart.
Best wishes.

mcdevito75 here, Generally, you need only worry about 2 buttons, MODE and SET. ----- Simply press the MODE button ususally on the right side of the dial on the watches caseing, see the display blinking now press set ususlly on the left side on the caseing, press set to adjust the functions, (hour, minute etc.) pressing mode after each function is set. When done press MODE again to see steady display. If by chance there is no MODE button, the MODE button may be a dimple on the caseing you can push in with a pin.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all FOSSIL watch manuals. Rate me, please .

Check that the battery is in the correct way up.

Try cleaning the battery with surgical spirit.

If these steps fail, take it to a watch shop.

If this also fails, find you nearest Fossil dealer (Fossil/customer care - store locator

It should still be under warranty.

Go to Fossil.com and send it to your nearest service center (with proof of purchase).

They should fix it for you.

Your question is unclear.

Please be more descriptive in your request.

adding a why of the failure is would be quite useful in answering your question.

RECOMENDATION: with information at hand.

Purchase a smaller watch.

Hope this tip helps.

r/
David

Bands are held to the watch body by springpins. To disengage them, I use a fine blade knife, and pull one end of the pin down by causing the blade to bite into the metal of the pin, between the eye of the band and the watch body. This method will work when dealing with leather straps, perhaps not with a metal band, depending on how much clearance there is between the watch fork and the band's eye.
If there is no clearance, it may be necessary to destroy the springpin to get the band free. Replacement pins can be purchased at a watch repairer.
Replacing batteries: You need the back off. Some screw on, most press in. Press- ins can usually be released with a knife blade, or small leverage device if there is a specific release place on the rear cover. On odd occasions, it becomes necessary to "use a hammer and chisel". Not easy.
Screw- off backs need a tool to engage the slots on the rear. Sometimes can be done with a pair of long- nose pliers.
The backs often have a fine rubber sealing ring, for water resistance.This needs to be put back in place carefully.
The batteries are held in place by various means, spring tension, clamping etc. Sometimes a screw or two must be loosened to free the battery.
Really, it is all a job for the experienced.
I only do work on my own and other family member's watches. I have a range of tools I have made for these. I wouldn't risk doing outsiders' watches. I do bands and batteries, but leave it at that.

click this link for watch fossil manualhttp://www.fossil.co.uk/webapp/wcs/stores/servlet/ContentView?page=customerCare_watchInstructions&storeId=32553&catalogId=25005&langId=10

Question edited for clarity. In this link, but you are better to have Fossil or a local jeweler replace it as it needs a press. https://www.google.com/search?q=Fossil+FS2919+crystal+replacement ..

Question edited for clarity and toss in some CAPS. Did you change it yourself? https://www.fixya.com/support/r27181038-changing_watch_batteries I think you have a number missing from the model number, they are all 4 numbers as opposed to 3. If you purchased it on Amazon or eBay, it is a clone. Contact Fossil and book it in for a service. https://www.google.com/search?q=fossil+j-123+big+tic ..

Just a model name but also when the battery is wearing down, the second hand jumps 2 seconds instead of one.

Fossil battery replacement sizes are usually a 2430 (CR2430), 371 (SR920SW), or 377 (SR626SW). https://www.fossil.com/en-us/******/how-to-change-a-watch-battery

Best advice right here in this Tip I wrote. https://www.fixya.com/support/r27181038-changing_watch_batteries ..

Question edited for clarity. Question moved from Cars and Trucks You can try and force a restart.

My watch is not working - Fossil Support

Fossil Group https://support.fossilgroup.com > article > My-watch-is... May 17, 2021 - For a hybrid smartwatch, try changing the battery; For a touchscreen smartwatch, try resetting the watch. If your watch continues to experience ...

WearOS Fossil Gen 5, 6 or Sport black screen and won't turn ...

MyHealthyApple https://www.myhealthyapple.com > wearos-fossil-gen-... 8 days ago - Try replacing the battery-this is often the cause of black screen/unresponsive issues on Fossil's hybrid watches. If you already did that, press ...

Fossil Watch Battery Replacement - Ultimate Size Guide -

batterymole.com https://batterymole.com > fossil-watch-battery-replace... Aug 21, 2022 - The CR2430 battery is a 3v lithium battery, see the shape below. This example is made by Renata, but you can also get the produced by Duracell, ...

notify fossil --watchsmith

The 18 inside a square on the back of your Fossil watch likely indicates that the watch case is made of 18-karat gold. This is a mark that is used to indicate the purity of gold. 18-karat gold is 75% pure gold and 25% other metals. This mark is typically used on jewelry and watches to indicate the quality of the materials used.

How many do you want? https://www.google.com/search?q=Fossil+JR-9525 ..

Hi Cassandra.this is what i found out from the net.Most hybrids are compatible with any CR2430 coin cell battery, which allows them to hold a charge for 4 to 6 months. Swapping in a new coin cell lithium battery can be done easily and in just a few simple steps, plus CR2430 batteries are available from most retailers that sell batteries.