20 Most Recent
Hobart AM14-253 Free-standing Dishwasher - Page 8 Questions & Answers
Hobart Dishwasher LXIC drains more water
Hi,
you would need to get a special code/programming manual from the manufacturer or a company that services a dishwasher of your brand. Because they usually ch arge for their services, they might not be willing to email you this manual, but I would still try.
Thank you.
11/5/2022 2:12:09 AM •
Hobart...
•
Answered
on Nov 05, 2022
Commercial Hobart dishwasher
I can't imagine a bad relay board would blow a fuse. The relay board would need to make a bad connection to ground to blow a fuse -- I don't see it.
If you could supply me with the ML#, I'll take a look at the wiring diagram and give you an educated answer.
Not that I recall clearly which fuse is for the drain solenoid, but the two sound related. If a drain valve is obstructed by debris, it will heat up the coil and short it out. I don't know the spec'd ohms, but I would suspect at least 50. I'd check it.
11/19/2021 12:50:44 AM •
Hobart...
•
Answered
on Nov 19, 2021
Hobart LXeC under counter bar machine, it feeds detergent and Rinse Aid at the start up together.
This is a low temperature machine. So detegent and sanitizer go in together and the rinse aid goes in at the rinse cycle. At the lines in the right containers. It is pulling sanitizer at the rinse cycle?
Page 11 of the manual leads me to belive it may be priming. Do you have non return valves in the lines of all the product? Your lines should be full of chemical all the time with no air spaces.
https://www.hobart.com.mx/pdf/ManualOper/F38404%20man.pdf
Your detergent supplier, Hobart, Ecolab, Diversey will often help with issues like this for no charge. Don't let them play with metering though. That is an old trick to get the salemen more sales. ;>)
..
10/20/2021 9:37:42 PM •
Hobart...
•
Answered
on Oct 20, 2021
I have a Hobart LX18C. New control board now turns on, but it says "18H" when it starts up and shows a P3 error code. I think it's confused because it's a C model (low temp) not H (high temp).
Error P3, Rinse Tank Booster Thermister is faulty
SOLVED: Hobart LXI Dishwasher a P3 code is flashing ...
https://www.fixya.com > support > t4318217-hobart_lx...
Mar. 11, 2010 - It is monitoring the rinse temp. P2 is the booser probe, and P1 is the wash tank. The control board will store error codes, so once changed, you ...
1 answer · 11 votes: The p3error is an open or shorted booster thermistor.take off btm panel on the right side is the bstr, do when cold and no power to mach.,TURN OFF BREAKER, ...
SOLVED: What is p3 code on hobart am15 dishwasher - Fixya
Sep. 2, 2019
SOLVED: What does a P3 code mean? On a Hobart LXI high ...
Jan. 5, 2014
My hobart am15 display a p3 error code and i make - Fixya
May 1, 2010
SOLVED: Error code "p3" appears in the digital panel with a ...
May 12, 2010
More results from www.fixya.com
18H doesn't exist
https://www.google.com/search?q=hobart+lx18c+18H+error+code
..
4/7/2021 2:33:57 AM •
Hobart...
•
Answered
on Apr 07, 2021
Not finding what you are looking for?