Top 20
KitchenAid Artisan 5KES100 Espresso Maker - red - Page 11 Questions & Answers
Milk are not running through tube
Nearly always milk solids stuck in the tube. You have to use an enzyme milk line cleaner to dissolve it and even then, sometimes you have to remove the tube completely and massage it out. I have been fighting this issue for 9 years commercially in airport lounges serving thousands of coffees a day. And our machines were cleaned twice a day at lunchtime and close. The product 'Rinza' is good.
How can i de-calcify my Saachi spresso maker ?
A simple thing to start with is to use a white vinegar mixture. Use EQUAL measures of water and white vinegar. Put it into the empty water tank and run it through the machine with NO coffee in it then Flush the machine with plenty of water. Mix up a second amount vinegar/water and repeat this method. Don't forget to flush the machine with plenty of water.
There are cleaners you can buy that you mix with water and use to clear the build up if it is a heavy amount.
To much water flowing on Curtis 111-s Curtis coffee machine
I had the same problem. I ended up taking the coffee machine apart and found that the reason coffee trickles out around the hot water spout is that the two coffee nozzles were partially plugged. Since I Had parts of the coffee machine apart I was able to clean it easily. It may also be possible to clean the assembly using a pick of some sort and clean out the holes of the two normal coffee spouts. Inside it is just a open cavity so gentle poking around and using some steaming hot water may do the trick.
If you want to take the machine apart you need to do the following: 1) take of the warmer plate on the top - 2 storz screws but an allen key works as well 2) take off the top plate of the machine - another 4 or 5 screws - make sure you empty the beans first otherwise you will have a mess 3) remove one screw from the right hand side of the removable coffee ground tray. Once this screw is removed the front panel is free to swing open except for the pipes connecting the front 4) unclip the steam assembly - there are a couple of plastic catches on the top. this will free the steam assembly from the front panel and also free a pipe connections. The steam dispenser pipe will also come free from the steam assembly. 5) remove the coffee pipes from the up and down sliding coffee dispenser. This is a small whitish color clip with 2 pipes connecting into it. The white clip has a little plastic catch on the top that frees it. The front panel should now swing open freely. 6) remove the sliding coffee dispenser from the front door. There are 4 plastic catches, 2 on either side. the whole front sliding coffee displenser now comes free 7) Take the sliding dispenser apart by release the 4 plastic catches on the front curved planel. 8) Inside the sliding dispenser is a white plastic piece that connected to the piping released in step 5. There is a small plastic catch that needs to be pressed while pulling fairly ******* the plastic piece and bending the whole piece. 9) You will now see the plugged spouts. It goes back together really easily.
Not finding what you are looking for?