20 Most Recent Kenmore 30 in. 33202 / 33204 / 33209 Gas Cooktop Questions & Answers

Hi,
Where the gas comes into the stove, there is a regulator. Have a service person check the incomeing gas pressure after the regulator with a manometer. Sounds like you are getting too much gas pressure to the range.

heatman101

It is not dangerous, but very annoying. Most likely you need a new spark switch. Or simply unplug it for 24 hours and see if it dries out. Usually people spill stuff on them.

kenmore stove repair in orange county, ca
appliance repair orange county, ca

remove hte buerner cap and with a nail file or emory clloth try cleaning the electrode(sparker), sometimes a build up of carbon onthem will prevent proper lighting, also lool for cracks in electrode itself,if ther cracked they wont be very effective and need replacing

sounds like knob needs replacing (broken).

so does mine

Check out stovedecals.com - they offer Kenmore stove decals for your stove or cooktop.

Clear the lock mechanism -- as indicated by the DOOR LOC light -- by pressing and holding in the oven door light switch for 20 to 30 seconds. While the switch is depressed, the latch motor will gradually withdraw the lock, allowing you to open your oven door.

Shut your gas off at the tank or meter valve. Open windows and doors and vacate. Call an appliance or gas technician!

Suggest down load the owners manual online and reference error codes.

no body at fixya site will do anything you have to contact the service agent direct yourself to book a service

Voltage check at plug or power panel

Fuse or control

Do you mean safety light to let you know burner is hot?????

Usually you can copy wiring from other element. Safest to consult wiring diagram found inside control panel.

Check fuses. Burners are usually fused in pairs. Probably 2 fuses since 220V.(one for each 110 side of feed).