20 Most Recent
Mongoose Exile 26 Men's Full-Suspension Mountain Bike - Page 5 Questions & Answers
I have a 26" alum mongoose on the frame their is 2 cracks where the handbar mounts is this factory warranty???
There should be no cracking in the frame if the bike has not been dropped or crashed at some stage which has then resulted in the cracking appearing.
If the bike has not been abused and the warranty is still current and not expired then you can make a warranty claim if you have the proof of purchase .
Read the warranty terms and conditions first which should have come with the bike documents. If not available, the warranty detail is probably published on the manufacturer's web site.
The better bike manufacturers using very good quality frames normally offer a long warranty on the frame. That is not the case for all the cheapie bikes which most people tend to buy.
How do I change a Bicycle Peddle arm? what tool do I need how much dose this tool cost?
It's called a crank arm, and the pedal (not peddle) is attached to the end. Usually one uses a crank puller, but as you have not said exactly what model bike you have or provided a close-up picture it's hard to advise you in more detail. Google "remove 3 piece crank arm" for help. In the future please put as much into proper spelling and details you provide as the effort you expect others to take in answering your questions. Although "dose," "peddle" and "stile" are actual words they are not the same as "does," "pedal" and "style." I’m happy to help further over the phone at
https://www.6ya.com/expert/donald_f2ed37026a3ac881
Mongoose MGX DXR crank set replacement. How to determine what to buy online?
How about just go to the source (manufacturer)?
Mongoose Contact Us They may be able to give you the required specs, and perhaps sources. That being said, from pics I pulled up it appears to use a cartridge type bottom bracket (would need to know proper spindle length) probably a "square taper" type, and you would also need to specify crank length. Pedals are standard 9/16" - whatever style you want. Depending on how much is missing (cranks, bottom bracket and pedals?) this could end up costing you quite a bit, so I hope you paid very little for the bike, which sold for less than $200 new, worth well under $100 used in rideable condition. I’m happy to help further over the phone at
https://www.6ya.com/expert/donald_f2ed37026a3ac881
What screw do I need for the crank arm because it keeps popping a loose when I pedal on it for too long or too fast
I can't tell what kind of crank you have for sure from your description, but I guess it is a square taper. (See http://www.parktool.com/blog/repair-help/crank-removal-and-installation-three-piece#article-section-2 for details of different types).
If that's correct, and you've ridden the bike with a loose crank, you won't be able to fix it because the tapers will be heavily damaged. You'll need to take it to a bike shop and get a new crank put on I'm afraid.
Not finding what you are looking for?