20 Most Recent Schwinn Trailblazer Bike Trailer Questions & Answers

If you have the old canopy, I can use it as a pattern to sew a new one for you. Mail it to me and I should have one made within a week or so. Cost: $120 + any tax + shipping. I made this replacement for a Burley D'Lite.

From the Schwinn website: "If you bought your Schwinn at an independent bike shop, please contact the shop to help you get replacement parts. If you bought your Schwinn at a big box retailer or sporting goods store, please call us to purchase parts - you'll need a major credit card and must be 18 or older. 800-626-2811" The 2nd option would also apply if you purchased the trailer used. FAQ Support Schwinn Bicycles I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

http://www.instep.net/productInstepPDFFiles/97pdf-1.pdf

Here is the link to the user manual.

The model number for the trailblazer is 13-SC770. Mine has a sticker on the tow bar w/the model # written on it...not sure if they all have that. I bought mine used and it didn't have the stroller attachments, but I was able to order them at Pacific Cycle (800-242-6110). Good luck!

you do have a quick release don't you? Why not just take the wheels off, it is made to do that. Very simple to do and makes it very portable. you can't break it.

http://www.instep.net/productInstepPDFFiles/97pdf-1.pdf

http://www.instep.net/productInstepPDFFiles/97pdf-1.pdf This is the link to the user manual.

This particular strap is a safety backup strap. This strap is just for in case that the first one securing the trailer to the bike breaks so it will still stay connected to your bike.

type www.managemyhome.com click manual put your schwinn joyrider model no.

If you have a quick release, you'll need to remove the release out of the wheel and then put it through the anchor and attach release back on.. If you have a nut, undo the nut, put the anchor on and then put the nut back on. Insert the end of the trailer into the large hole of the anchor and fasten the pin.. then attach the safety cable by wrapping it around the frame of the bike...

I DISMANLED AN OTHER PLUG UNIT THANK YOU. D,R, FORRYAN