20 Most Recent
Kenmore 53202 / 53204 / 53209 Side by Side Refrigerator - Page 3 Questions & Answers
Is it okay to transport a new fridge on its side or back?
The key here is that you must let the unit stay upright for a period of time BEFORE you plug it in. So, yes it is ok to transport it on its side. Let the unit sit in its correct position for 4 hours or so and you should be fine. The issue is the oils and freon (or equivalent) that must be allowed to pool in the bottom before you attempt to run it.
Dan
6/26/2023 5:59:00 PM •
Kenmore...
•
Answered
on Jun 26, 2023
Why do I still get an error code r dh?
If you've already replaced the temperature sensor, defrost heater, and main control board on your Kenmore refrigerator model 795.72043.112, and you are still experiencing the r dh error code, there are a few additional possibilities to consider:
- Check the defrost thermostat: The defrost thermostat is responsible for regulating the defrost cycle in the refrigerator. If it is faulty or not functioning properly, it could trigger the r dh error code. Inspect the defrost thermostat for any signs of damage or malfunction. If necessary, replace it with a new one.
- Examine the wiring and connections: Inspect the wiring and connections related to the temperature sensor, defrost heater, and control board. Loose or damaged connections can interfere with proper communication and cause error codes. Ensure that all connections are secure and undamaged. Consider using a multimeter to test the continuity of the wiring and verify proper functionality.
- Verify proper power supply: Check the power supply to the refrigerator, including the outlet and the power cord. Ensure that the refrigerator is receiving stable power without fluctuations or interruptions. Irregular power supply can affect the operation of the control board and trigger error codes. Try plugging the refrigerator into a different outlet or using a voltage stabilizer to eliminate potential power issues.
- Seek professional assistance: If you've exhausted the above steps and the r dh error code still persists, it may be best to contact a qualified technician or the Kenmore customer support team for further diagnosis and assistance. They have access to specialized tools and resources that can help identify and resolve complex issues with your specific refrigerator model.
When reaching out to customer support or a technician, provide them with the details of the steps you have already taken and the specific error code you are encountering. This information will help them provide more accurate guidance and solutions tailored to your situation.
6/18/2023 4:24:44 PM •
Kenmore...
•
Answered
on Jun 18, 2023
Purchase a door push button switch for my refrigerator
Visit a local appliance repair shop or parts store that specializes in refrigerator parts. Bring the make and model information of your refrigerator to ensure you get the correct switch. They can assist you in finding the right door push button switch for your specific refrigerator model.
6/10/2023 5:45:47 PM •
Kenmore...
•
Answered
on Jun 10, 2023
My kenmore upright freezer is beeping
Unplug it, empty the contents, then defrost the freezer with a fan blowing into it until there are no signs of ice. Then reload and plug it in again and see if the problem is fixed.
6/4/2023 2:42:47 PM •
Kenmore...
•
Answered
on Jun 04, 2023
Not finding what you are looking for?