Top 20 Jules Jurgensen Fisherman 7485 Wrist Watch Questions & Answers


First you have to get an eyeglass and examine watch caseback. Can you see the joint or is it monoblock? If there is joint, get strong knife and press into it. Some of watch casebacks are very tight, so, apply great pressure but do not let the blade slip or you will damage the movement.
If the case is monoblock, then you have to open it from dial side.
Be very carefull when doing it as any slip of the blade will damage your watch.

Good luck.

Jules Jurgensen... | 2,163 views | 3 helpful votes


The only way is if you open it up.

Jules Jurgensen... | 89 views | 0 helpful votes


Yes you can replace batteries in wrist watches. And No we are not the company warranty indicated for service. Try contacting your local distributor to help with directions for service office.
Hope this solution has been helpful?

Jules Jurgensen... | 142 views | 0 helpful votes


For removing or adding links firstly you will have to remove bracelet pins or screws. In case if there are screw on each side of bracelet - you have to use two screwdrivers simultaneously. In case if there are pins - read the rest:
You may or may not have arrows inside bracelet. Arrows are pointing the way the pins must come out. First you have to find out what sort of pins or even screws are used to keep links together (screw ends and pin end may look similar). Examine both bracelet sides and find the side where pin ends have a groove. Start with a tiny screwdriver and try to unscrew one. If it turns, but doesn't come out, that means you have a pins instead of screws. For removing pins the best would be pin removing tool (approx.5GBP on ebay), but it's possible to do the job without it. Take a hardened steel needle and blunt the sharp end to the approx. size of pin end diameter using any sharpening stone or sandpaper. Get an old towel and fold it to make a soft base for work (like small cusion). As you don't have a special bracelet holder you will need a pair of helping hands to hold the bracelet steady upright. You will need small hammer and pair of flat nose pliers as well. NOTE: The pins MUST be driven split end out first, not vice versa. Make sure that the grooved pin ends are facing towel, not the needle and hammer. Now place the watch on the folded towel, take that needle and smallest hammer you have and start driving the pin out using light blows. Do Not hit hard, as you will brake the needle, scratch your watch or even injure yourself. Watchmakers are using 45 gram hammer, so, calculate your strength of blows. After a few punches check if the split end is coming out and when you see that the pin end is coming out long enough - grab it with pliers and pull the pin out with pliers. When pulling, do NOT turn pliers, as pins tend to brake when twisted. Use firm grip and your strength to pull the pin without twisting. After shortening the bracelet or adding extra link(s) make sure that the pins go back EXACTLY the same way as they came out- the blunt end first in the hole and the split (grooved) end last. Before doing that check remaining pins in bracelet to make sure that you put them back from the right side of bracelet. It is recommended to use plastic hammer to drive pins back in or you will scratch or damage bracelet. If plastic hammer is not available use an old toothbrush handle (or some plastic item) as an absorber. Simply put pin into the hole as deep as you can with your fingers, put the toothbrush handle on split pin end and hit handle, not the pin. Make sure that pin ends are flush with bracelet. If needed- hit few more times. Job done! If you do not want to do it yourself, any jeweler will do it in a matter of few minutes.

Jules Jurgensen... | 219 views | 1 helpful votes


While the firm does not appear to be selling watches any more, they still repair them, although they are in America!

Go to http://www.helbros.com/ for their contact details.

Jules Jurgensen... | 218 views | 0 helpful votes


mcdevito75 Here, I did a Fast Search and found a customer service number for Blue Dial a Jules Jurgensen Dealer, nothing on the main company though. Blue Dial may be able to help, it"s a toll free number, 1-877-518-9396 Hope this helps.

Jules Jurgensen... | 139 views | 1 helpful votes


All watches should arrive with battery fitted. As now there are too many variations of watch movements, it's impossible to tell exact battery code without seeing the watch. Nearest watch repair shop will be able to tell you that.

Jules Jurgensen... | 281 views | 1 helpful votes


JJ do have a warranty but I do not know how long you have had your watch. Its always best to send your watch back to original vendor, especially on a more expensive watch. Any other repair done by outside sources can and will null and void the manuf. warranty. I would HIGHLY suggest the link below: The price is very resonable for the s/h.
http://www.jjwatch.com/watchRepair.asp

good luck

Jules Jurgensen... | 111 views | 0 helpful votes


Try this or they might be able to direct you further:

Is this your company?
Claim This Profile
Gold Cat Jewelry 19105 Kishwaukee Valley RoadMarengo, IL 60152-9211 map Phone: (815) 715-6186

Jules Jurgensen... | 82 views | 0 helpful votes


Google

make model manual

it is impossible for us to guess what you have.

Watches | 164 views | 1 helpful votes


Google (tagital)(T1)(manual) without parens OR request directly from Tagital.

Watches | 32 views | 0 helpful votes


  • Defective "new" batteries
  • Incorrect installation

Watches | 164 views | 1 helpful votes


Are you sure that you removed all of the plastic packagings that come with new units? these are usually in the inlet to prevent any dust etc. and would prevent any water from entering the unit.

Watches | 29 views | 0 helpful votes


From the fitbit.com dashboard, click the gear icon > Settings > Personal Info. Under Advanced Settings, find Clock Display Time and select whether you want the time shown in 12-hour or 24-hour clock units. Click Submit and sync your device.Aug 13, 2019

Help article: How do I change the time on my Fitbit device?


https://help.fitbit.com > articles > en_US > Help_article

Videos

https://www.google.com/search?q=set+correct+time+on+fit+bit+watch

Watches | 24 views | 0 helpful votes


Are you sure who made it? ROHS is a label that certifies that it doesnt have hazardous substances. https://en.wikipedia.org/wiki/Restriction_of_Hazardous_Substances_Directive
Please Add Information or Comment with any other identifying numbers or names

Watches | 29 views | 1 helpful votes


Download the manual as a pdf and read

Watches | 62 views | 0 helpful votes


Most fitness bands have an app you must install.
The band will then connect to the app for setup.

Watches | 32 views | 0 helpful votes

Not finding what you are looking for?
Jules Jurgensen Fisherman 7485 Wrist Watch Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Jules Jurgensen Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Are you a Jules Jurgensen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jules Jurgensen Watches

  • Jules Jurgensen Watches

Most Popular Question

change battery jules jurgensen pocket

  • Watches
Loading...