20 Most Recent Kenmore 21.9 cu. ft. Side-By-Side Refrigerator with Filtered Ice and Water - Page 7 Questions & Answers

Get a ruler and measure the height, width and depth. Multiply them all together and that is the size, in Cu feet or whatever measurement you took.

Hey, thanks for contacting us. If water is building up in the freezer's bottom, you may need to check for its drain tube. Drain Tube might be clogged or frozen. you may need to defrost it and remove any Ice clogged in the tube.

I presume that the party from whom you purchased the house did not leave the original sales bill or warranty card for the refrigerator. Such items typically have the model number. Bearing you are without that documentation, you have to know where to look on the refrigerator for the model number. There are two labels on the refrigerator that have the model number. The first one is situated at the lower left of the refrigerator's exterior. Look at the frontal part to find this label. The other label is attached inside the refrigerator. Simply open the refrigerator to find the model number. The number is located near the top shelf. Check on the sidewall of the top shelf. You will likely find the model number there! I realize you have found a number but that one is a dead end for me. The number you are looking for should have 3 digits followed by a period and that period is followed by more numbers. Kenmore support should be of greater assistance than I can be without knowing the model. I would hate to try to figure out the model by measuring its capacity and looking for models with such that were over six years old. If the tips on finding the model number don't pan out, perhaps Kenmore support will have better advice: https://www.kenmore.com/contact-us

Question edited for clarity. Question moved from MISC, to Kenmore Refrigerator. Please always include full 'make model (what is is)'. Yes it sounds like it. With board issues, I would always advise calling out a technician so you get the correct diagnosis and warranty on the part and the work done. They aren't cheap. If the unit is old, a new one is the best plan. You may find the board is not available. ..

https://search.brave.com/search?q=How+many+cubic+feet+is+Kenmore+model+106.74906400+refrigerator&source=web

should be a shut off valve under sink. It is on the right side this is the cold water feed. There should be 2 valves one to sink faucet and one to refrigerator.

Inside the fridge. On the wall.

what I do is open panels to view the EVAP core is not packed on ICE then defrost is not it. (barking up wrong tree?) or if is ,the defrost fan is dead. yes some have timer others are via controller. board the new board is wrong one or used and bad, off fleabay?

possible compressor drawing too much amps or low freon

Disconnect the defrost element and check with a multimeter for continuity. If there is no continuity, the element has failed. If the element is good, check the connections. There is usually a Defrost Timer, but this uses a Defrost Sensor. Put 'defrost' into the Parts Search. Heater https://www.searspartsdirect.com/product/2i5x3d492k-0046-795/id-mee62105201 Sensor https://www.searspartsdirect.com/product/1ff3ug3vf2-0046-795/id-acm73919201 https://www.searspartsdirect.com/model/2eozk34nvj-000583/kenmore-elite-79572053110-bottom-mount-refrigerator-parts Timer normally https://www.google.com/search?q=Kenmore+Elite+refrigerator+795.72053.110+defrost+timer For Control Board replacement, I always advise getting a service call due to cost and warranty. ..

That is possibly a filtering material rather than insulation and is to help stop dust and fluff reaching the coils. If it definitely insulation like fibre glass, it should not be covering the front grill, so it may have just dropped down. I would definitely remove it as the fan draws cool air over the coils and over the compressor. Keeping it cool is the key to an efficient system. Set a reminder to clean the coil in a years time though as they are best done every year.

Try fixing the broken wire would be my first effort.

There is a class action lawsuit as them failing is a known issue. They have a 13 year lifespan according to this. The suit is still open.https://topclassactions.com/lawsuit-settlements/consumer-products/appliances/kenmore-refrigerators-refuse-recall-despite-defect-class-action-lawsuit/If your door icemaker was working, you could blame a faulty evaporator fan in the fridge for it being warm or even an iced up evaporator coil. Considering nothing is as cold as it should be, a failing compressor or being low on refrigerant gas are the likely culprits. The article explains what the issue is, a plastic valve in the compressor that is known to fail. One engineer replaced 7 in a month and keeps a spare in the truck, BUT, the replacement is the same as the one that came out and has a the same plastic valve known to fail!There is nothing further on the remote diagnostics.https://www.google.com/search?q=795.74043.411%2C+remote+diagnostic+toolGet rid of it and buy a different make, not LG or Kenmore. My GE fridge freezer is 23 years old and has only needed a defrost timer. Join the lawsuit...

Question edited for clarity. Is this using the knob on the thermostat inside the fridge. If so they should be a 'ramp position' at the Zero mark where you can feel the contacts lift apart. If you can't feel that, the thermostat needs replacing. Having said that, why do you want to switch off? You can just pull the plug. If it is because you have a freezer on it as well, the fridge takes very little power, so just turn it down and leave it running.

https://www.searspartsdirect.com/manual/4fyfx4sz5t-000582/kenmore-10678919801-top-mount-refrigerator-parts

Question edited to add a few uppercase letters as needed. Some Coldspot 106 models feature in-door ice and water dispensers, which allow users to choose between cubed or crushed ice and chilled water. The refrigerator includes about 15.3 cubic feet of space and has glass shelves; on some models, these slide out for easy access. The unit also includes convertible vegetable crisper and meat drawers and covers for the same. The drawers have their own temperature controls, and the crisper drawer includes a humidity controller. A shallow inserted vegetable tray completes the crisper drawer, adding space to store delicate vegetables above heavier ones. The freezer is around 5.4 cubic feet and includes wire storage bins and baskets; on some models, these tip out to improve access. Both doors, the crisper, and the ice/water dispenser each include a light bulb. The dispenser uses a heavy-duty 10-watt bulb, and the other bulbs are all 40-watt appliance bulbs.

A few things spring to mind. Failed Defrost timer. Failed Evaporator fan. Blocked Defrost drain. Calling for service is your best bet.

https://www.youtube.com/watch?v=zYbEWgzrUd8 https://www.youtube.com/watch?v=0E_QX7y_Mr0 One of these YouTube videos may assist you with your frozen ice maker problem. This section of Fixya is responded to by any volunteer across the country. It is free however some queries may not be responded to in a timely fashion as the queries seem to rotate out of view as more come in although all are retained as unanswered questions. If you wish to unsubscribe to Fixay, here is a procedure: In order to cancel your membership at FixYa, you should send them a cancelation request at support@fixya..

No data exists. Ball park figure by dimensions https://www.google.com/search?q=kenmore+coldspot+106+weight Weight of French door fridge.: Weight (lbs.) 331 Weight, Shipping 364

Go to utube or pinterest...loads of videos