Luminox Field 821 wristwatch - Answered Questions & Fixed issues

How to replace battery Paul Jardin watch can't get back off

Pull the winder out to either the 1st or 2nd click & use the push buttons to zero the hands in.

you can find an exper in the local shop where you buy the product and they will give you specific service

for your questions about your product.

In addition, i like to play world of warcraft. there is a reliable website for

all players to get wow gold sale with the lowest price wihit in

10 minutes' fast delivery and you also can enjoy first class service

for your login.

a 395 cell is what is normally put in this watch from the manufacturer I wouldnt advise using a lithium battery

If you have your instruction manual it should tell you how to reset the chrono. i have the Luminox 8352 and it says to pull the crown out to the 3rd position. then press and hold both the start/stop and lap/reset buttons for a couple of seconds. you'll see the second hand rotate, then you can single click the start/stop button to manually move the second hand 1 second, or you can hold it and it will continue move for a longer period until time desired. if you need to adjust the other chrono hands, click the lap/reset button and then you can click the start/stop button again. repeat for the minute/hour chrono hand. when you're finished push the crown back in. it might work even though it's a different model, worth a shot? hope that helps. these are really great watches.

yes! I Don't recommend doing this yourself but if you open up the back you will see AC and a spot to touch with a twezer to short it out to the main plate.Then close the watch and pull the crown out and push the pushers in and out to set each dial.

a mechanical part needs replacing, unless your have some form of funky split time running? replacing the battery should have reset it though.

take it to a watch maker for a quote and to see if the parts are available

Have to know the model and serial of the furnace. locate code list usually inside or on the back of a door. Operation sequence= call for heat--inducer blower motor--makes pressure switch--signals board to bring on hsi--after a set time gas valve opens and you have ignition providing current to flame sensor--main blower motor comes on after a set time

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all LUMINOX watch manuals. Rate me, please.

you must have the tools to do that. all you need is a pin remover, pliers and mini hammer.

Hi,
Here is a link that can help you step by step with visuals.
I hope this will be able to help you.
Thank you for choosing Fixya.

You can get a manual by going to http://www.luminox.com/service/service-centers/ and select the one that you need.

If it's like my Luminox 1828, the crown has to be unscrewed before it can be pulled out and worked like a regular crown. Just don't forget to screw it back down afterwards.

You can not get photos directly from your PC to the photo frame. You have to transfer photos to removable media first (SD card or similar) and then use this media in photo frame.

It can be the battery if your watch model has separate battery for alarm function. If your watch originally is running on one battery, then check out if the sound transmitter spring is missing. Sound is transmitted through the coil spring or small peace of metal which is sticking upwards out of movement, so, when the case back is fitted to the case, the spring is touching sound membrane inside the case back, thus enabling transmit vibrations (sound). If there is nothing as I just described, you will need to get one and fit it to the movement. If there is such a spring, then movement has micro electric fault and should be fixed. In both cases you have to visit your nearest watchmaker and ask for help.
Rate me, plz.

Here is the manual you would need to rezero the chronograph...good luck :)

try parsecent.com...they would have the parts to fix

parsecent.com...they have all the parts to fix it with and they also have to band-to-case piece that you've lost

i agree, luninox are fairy good water resistant watches and will need to be resealed properly...take to or send to a watch service you trust...dont take to a kiosk is all I have to say