Top 20
Weed Eater 25cc 2-Cycle Curved-Shaft Gas String Trimmer FL25C - Page 4 Questions & Answers
What is the best wood material to build a storage shed?
Tanalized pressure treated cedar Joe. It looks nice, smells great and holds up well in the weather. If you don't stain it, the finish will go a soft grey, and if you want to bring it back, you can pressure wash it. Larch if you can get it, comes second. My waterwheel in England was cast iron, but the timber was Larch, and it lasted really well.
I hope you are doing well Joe and as it is Thanksgiving weekend in Canada, I will wish you a good one in advance!
..
10/7/2023 1:29:35 AM •
Garden
•
26 views • 1 helpful votes
Lawnmower will not move while running
no ibfo generic answer --check drive belt --popped off --broke--pulley problem--trans axle problem ---key way on wheel sxle damaged or missing
9/25/2023 12:52:56 AM •
Garden
•
31 views • 0 helpful votes
Ride on mower coil keeps burning out
Overheating of the engine and faulty ignition coil components, such as spark plugs and cables, are the most common causes of repeated ignition coil failures. If your ignition coil becomes too hot or becomes burned out after a few attempts, the reason may be due to incorrect spark plugs
9/7/2023 12:08:15 PM •
Garden
•
43 views • 0 helpful votes
Husquavrna Lt1536 not cutting
Remove belt tension and test the tension pulley arm (55) rotates freely and spring (148) is in place. See attachment.
Husqvarna (USA) lists the belt as discontinued and no substitute. I find the belt should be 92.5" in. If measurement is questionable then take the belt with you to a local supplier and compare lenth of old belt to a new belt of known length 92.5".
9/15/2023 9:39:02 AM •
Garden
•
30 views • 0 helpful votes
My Scott's 15hp/42 cruise control riding lawnmower will not move after releasing clutch/ brake
It's a rebranded John Deere. See following URL for parts diagrams..
https://partscatalog.deere.com/jdrc/search/type/model/term/S1642
Check the transaxle drive belt is intact and not loose when brake is released. The belt runs from the top drive pulley of the engine to the back of the unit to power the transaxle.
Owners manual is also available for no fee download on the JD website
9/25/2023 12:33:26 AM •
Garden
•
25 views • 0 helpful votes
John Deers Sabre GX1438 transmission issue?
this shows the parts exploded views of drive train -deck-with their pulleys and belts check the linkage at transaxle as well as the pulleys -------------- https://www.weingartz.com/illustrated-diagram/john-deere-parts-lookup/model-sabre-1438-lawn-tractor-pc2675/4275-36038
9/7/2023 12:09:20 PM •
Garden
•
30 views • 1 helpful votes
Not finding what you are looking for?