Top 20 Luminox Navy SEAL Dive 3003 Wrist Watch Questions & Answers

you can try ebay for a used one for parts only. luminoxparts.com may have one if you email them. i may have one available, i will know in a couple of days. waiting on a replacement battery for mine. if the quartz movement is bad, than i will be willing to sell it for parts.

The hand in question is slipping on the spindle that it is attached to. You need to carefully but firmly push it back down on the spindle so it moves. Have to get access to the dial and needles to do this

a mechanical part needs replacing, unless your have some form of funky split time running? replacing the battery should have reset it though.

take it to a watch maker for a quote and to see if the parts are available

Have to know the model and serial of the furnace. locate code list usually inside or on the back of a door. Operation sequence= call for heat--inducer blower motor--makes pressure switch--signals board to bring on hsi--after a set time gas valve opens and you have ignition providing current to flame sensor--main blower motor comes on after a set time

you must have the tools to do that. all you need is a pin remover, pliers and mini hammer.

Hi,
Here is a link that can help you step by step with visuals.
I hope this will be able to help you.
Thank you for choosing Fixya.

You can get a manual by going to http://www.luminox.com/service/service-centers/ and select the one that you need.

Thanks for contacting us at FixYa. Yup, its the battery. Good call. Best regards.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all LUMINOX watch manuals. Rate me, please.

Hi,
If you could provide the model model number of the luminox watch you need help with . We would be able to help you better.


Thanks for using Fixya
Proton

You can not get photos directly from your PC to the photo frame. You have to transfer photos to removable media first (SD card or similar) and then use this media in photo frame.

It can be the battery if your watch model has separate battery for alarm function. If your watch originally is running on one battery, then check out if the sound transmitter spring is missing. Sound is transmitted through the coil spring or small peace of metal which is sticking upwards out of movement, so, when the case back is fitted to the case, the spring is touching sound membrane inside the case back, thus enabling transmit vibrations (sound). If there is nothing as I just described, you will need to get one and fit it to the movement. If there is such a spring, then movement has micro electric fault and should be fixed. In both cases you have to visit your nearest watchmaker and ask for help.
Rate me, plz.

Hello. I suspect that the replacement was not at full power. Return it. When you open the watch up and remove this faulty battery take a minute to clean the contacts in the battery compartment with the eraser on the end of a common pencil. You also may not have had a good replacement. Go to any radio shack store and have the clerk replace the battery for you. IF it is still not as bright, they will have a meter to test and see what is going on. Joe

Pull the crown out 2 positions , set time, then push back in...if the hands dont work they are probably either rusted, stem is rusted or you have bad set levers, possibly the hour wheel is stripped also

If it's like my Luminox 1828, the crown has to be unscrewed before it can be pulled out and worked like a regular crown. Just don't forget to screw it back down afterwards.

You'll need a watchmaker to fit the new bezel. If it is just scratched I wouldn't recommend fixing it. You may pay 50$ for the new bezel and a pressure check; that may not be economical.

As reference, for a similar model Caliber 5130B with "Alarm Field Chronograph" this information and documentation can help you...
- User's Manual interactive
- Technical instruction PDF
- Technical instruction interactive

Check here for more information and details about Caliber 5130B

I really hope help you with this. Good luck.

hate to tell you but luminos are not top of the line at anything. i have seen this many times

Hi there,

it has some Grip Wheel  problem. In simple mean it need a internal repair at that time. are you a watch Tech.?
Please reply...
Thanks