20 Most Recent Luminox Navy SEAL Dive 3003 Wrist Watch - Page 3 Questions & Answers

You can get a manual by going to http://www.luminox.com/service/service-centers/ and select the one that you need.

Thanks for contacting us at FixYa. Yup, its the battery. Good call. Best regards.

Hi,
If you could provide the model model number of the luminox watch you need help with . We would be able to help you better.


Thanks for using Fixya
Proton

If it's like my Luminox 1828, the crown has to be unscrewed before it can be pulled out and worked like a regular crown. Just don't forget to screw it back down afterwards.

You can not get photos directly from your PC to the photo frame. You have to transfer photos to removable media first (SD card or similar) and then use this media in photo frame.

Hello. I suspect that the replacement was not at full power. Return it. When you open the watch up and remove this faulty battery take a minute to clean the contacts in the battery compartment with the eraser on the end of a common pencil. You also may not have had a good replacement. Go to any radio shack store and have the clerk replace the battery for you. IF it is still not as bright, they will have a meter to test and see what is going on. Joe

It can be the battery if your watch model has separate battery for alarm function. If your watch originally is running on one battery, then check out if the sound transmitter spring is missing. Sound is transmitted through the coil spring or small peace of metal which is sticking upwards out of movement, so, when the case back is fitted to the case, the spring is touching sound membrane inside the case back, thus enabling transmit vibrations (sound). If there is nothing as I just described, you will need to get one and fit it to the movement. If there is such a spring, then movement has micro electric fault and should be fixed. In both cases you have to visit your nearest watchmaker and ask for help.
Rate me, plz.

Here is the manual you would need to rezero the chronograph...good luck :)

try parsecent.com...they would have the parts to fix

parsecent.com...they have all the parts to fix it with and they also have to band-to-case piece that you've lost

i agree, luninox are fairy good water resistant watches and will need to be resealed properly...take to or send to a watch service you trust...dont take to a kiosk is all I have to say

Pull the crown out 2 positions , set time, then push back in...if the hands dont work they are probably either rusted, stem is rusted or you have bad set levers, possibly the hour wheel is stripped also

You'll need a watchmaker to fit the new bezel. If it is just scratched I wouldn't recommend fixing it. You may pay 50$ for the new bezel and a pressure check; that may not be economical.

As reference, for a similar model Caliber 5130B with "Alarm Field Chronograph" this information and documentation can help you...
- User's Manual interactive
- Technical instruction PDF
- Technical instruction interactive

Check here for more information and details about Caliber 5130B

I really hope help you with this. Good luck.

hate to tell you but luminos are not top of the line at anything. i have seen this many times

Hi there,

it has some Grip Wheel  problem. In simple mean it need a internal repair at that time. are you a watch Tech.?
Please reply...
Thanks

It is very possible that the battery is old. They sit in the stores for a while before selling. Good brands of batteries are recommended but not a guarantee of a fresh one. Batteries can be poorly made, lack a proper charge, etc. from the store. I have installed three batteries before on the same watch before finding one that worked. I sometimes have bad luck. I buy batteries in bulk and replace as necessary now.

Si porque tengo este reloj