20 Most Recent Bradford White Bradford MI30T6FBN-337 30 Gallon Wa Questions & Answers

1) Just open the following link to identify gas control, and following instructions for lighting each gas control that appear under the gas control that looks like yours.http://waterheatertimer.org/How-to-troubleshoot-gas-water-heater.html#intellivent2) Otherwise add a comment and carefully describe gas control valve, and then open link and compare your description to pictures of each gas control valve, and then look below each picture for link that says how to light water heater.3) Call plumber.or local service technician, or local BW supplier who can recommend technician.4) Call Bradford White to get recommendation of local technician. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

1) Copy following link to identify gas control valve:http://waterheatertimer.org/How-to-troubleshoot-gas-water-heater.html#intellivent2) Add a comment and describe gas control valve, and include if this is on boiler or water heater If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

1) Copy following links to identify gas control valve and read ignition procedure, and access service manual for your product:http://waterheatertimer.org/How-to-troubleshoot-gas-water-heater.html#intellivent2) Honeywell gas control used on recent Bradford White gas water heaters has red knob that rotates to pilot. Press and hold red knob. Then push red igniter button until status light changes. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Sounds like the TCO is tripping .../. because temperature inside burner is higher than 180° Replace TCO ... and it problem is not fixed, replace gas control valve thermostat http://waterheatertimer.org/troubleshoot-gas-water-heater-thermostat.html

Replace the motor

Copy following link for replacing thermostat.http://waterheatertimer.org/How-to-replace-thermostat-on-electric-water-heater.htmlSuggest you might also want to test the elements while power is turned off, just in case the problem is element shorted to ground across metal tank to ground wire.http://waterheatertimer.org/How-to-test-water-heater-element.htmlAt least you know the 240volt power to water heater and the circuit breaker are good. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

I am not sure they are available to non Hitachi service centres. https://documentation.hitachiaircon.com/glb/en/pac/rua-at3s

Cannot find the fault code . There are vidoes on u tube saying how to reset thr code By pressing the reset button . If this does not work youcan ccontact vaillent on there web page . I have a mate who works for them i will ask him as well

Do I need to insulate this heater out in the shed? Freezing temperatures

Call a engineer

The P8 fault can mean many things when it pops up on your Mitsubishi Electric wall controller. The P8 fault is activated when the indoor coil sensor does not change the temperature for a set amount of time after the compressor is (or should be) switched on.

Where does the tube sensor go

This one looks the same.https://www.ebay.ca/itm/133397559348They are made by Harper Wyman and using that model number, this is the result.https://www.google.com/search?q=Atwood+RV+oven+control+valve+57294But this shows more that looks similarhttps://www.google.com/search?q=Harper+Wyman+oven+control+valveAnd then if we go here and Zoom in, you will see MTZ 22300https://youngfartsrvparts.ca/products/used-atwood-wedgewood-oven-thermostat-57294Which leads us here and the Specs Sheet.https://www.copreci.com/en/gas-cooking/product-range/thermostats/with-safety-and-thermostatic-flow-regulation/372-mtz-22300-seriesand from there to here, and Parts Town stocks them!List Price: $ 318.24https://www.partstown.com/fagor-commercial/fgrc12008712..