20 Most Recent
Vacmaster VP215 Chamber Vacuum Packaging Machine - VP215 - Page 5 Questions & Answers
How do you restore the slip ring contacts at the canister end of the Miele SES 125-3 hose?
The slip ring contacts at the canister end of the Miele SES 125-3 hose are responsible for transmitting electrical power to the motorized brush head. Over time, the slip ring contacts can become dirty or corroded, which can cause the brush head to stop working properly. Here are the steps you can follow to restore the slip ring contacts:
Unplug the hose from the vacuum cleaner and remove the brush head.
Look for the slip ring contacts inside the canister end of the hose. You may need to use a flashlight to get a good view.
Use a small brush or a cotton swab to gently clean the slip ring contacts. Be careful not to apply too much pressure, as this can damage the contacts.
If the slip ring contacts are heavily corroded, you may need to use a mild abrasive to remove the corrosion. Be sure to use a non-abrasive cleaner specifically designed for electrical contacts.
Once the contacts are clean, use a dry cloth to remove any excess cleaner or debris.
Reattach the brush head and plug the hose back into the vacuum cleaner
If the slip ring contacts are damaged beyond repair, you may need to replace the hose or take it to a professional for repair.
3/17/2023 5:34:56 PM •
Vacuums
•
Answered
on Mar 17, 2023
I have a DC19 and the head will not release from the wand. The release button seems stuck?
A completely white screen with white vertical lines on your Mitsubishi WD 77731 TV can be an indication of several possible issues. Here are some potential causes:
- Faulty T-Con board: The T-Con board is responsible for processing the image signal and distributing it to the screen. If the T-Con board is faulty, it can cause the white screen and vertical lines issue.
- Loose or damaged cable connections: Loose or damaged cable connections can interfere with the transmission of the image signal, causing the white screen and vertical lines issue.
- Failed backlight: The backlight of the TV illuminates the screen from behind. If the backlight has failed, it can cause the screen to appear white.
- Damaged LCD panel: The LCD panel is the display screen of the TV. If the panel is damaged, it can cause the white screen and vertical lines issue.
To troubleshoot the issue, you can try the following steps:
- Check the cable connections: Make sure that all cables connecting the TV to the source device (such as a cable box or gaming console) are properly connected and undamaged.
- Power cycle the TV: Turn off the TV and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on.
- Check the T-Con board: If the T-Con board is faulty, it may need to be replaced. You can check for any visible signs of damage or contact a professional to diagnose and replace the board if needed.
- Check the backlight: If the backlight has failed, it may need to be replaced. You can shine a flashlight on the screen to see if there is any image visible, which would indicate a failed backlight.
- Contact a professional: If none of the above steps resolves the issue, you may need to contact a professional for further diagnosis and repair.
3/6/2023 8:11:12 AM •
Vacuums
•
Answered
on Mar 06, 2023
Tristar***mg1
Looking for owners manual for a Tristar MG1.
2/26/2023 4:42:43 PM •
Vacuums
•
Answered
on Feb 26, 2023
Blueprints Vacuum hoses w part numbers
I'm sorry, I need more context to provide a specific answer. Blueprints for what kind of device or system are you referring to? Can you please provide more details or clarify your question?
2/26/2023 12:02:30 PM •
Vacuums
•
Answered
on Feb 26, 2023
My wet dry vac model # L250 don't have suction. What do I do?
If the loss of suction occurred during wet vac,the float has blocked the discharge vent , and this can be cleared by unplugging vac and emptying tank. if you tip the unit over while running it will close exhaust vent and can be cleared by turning unit off and wait 1 minute and restart unit.The most common causes of loss of suction are dirty filters or a clog in the hose. To troubleshoot, remove the hose from the vacuum, place your hand at the opening of the tank inlet and turn the vac on.
If you feel suction at the inlet, the issue is with your hose or accessories. Check your hose and accessories for a clog. If no clogs are found, check the hose for a hole or crack - even a small crack can cause a loss of suction. If a crack or hole is found, replace the hose.
If you do not feel suction at the inlet, turn the vacuum off and unplug from the outlet. Follow the steps in the user manual that came with the vac to clean the filter. Check the filter for rips or tears; replace with a new filter if any are found. Empty the tank or if you are using a collection bag replace it if it's full. Make sure the filters are properly installed then secure the housing to the tank. Plug the cord into the outlet, turn the unit on and place your hand at the tank inlet to check for suction. If you still do not feel suction at the inlet, turn the vacuum off and unplug from the outlet. Check the tank for any cracks and make sure the drain cap, if applicable, is secured to the tank.
2/18/2023 7:27:33 PM •
Vacuums
•
Answered
on Feb 18, 2023
I replaced the red canister latch on my DC41, but now it doesn't properly secure to the handle.
If the red canister latch on your DC41 is not properly securing to the handle after replacement, there may be a few possible causes.
- Misalignment of the latch: Make sure that the latch is properly aligned with the corresponding grooves or hooks on the handle. The latch may not securely lock into place if it is not properly aligned.
- Damaged or worn latch components: The latch components may be damaged or worn, preventing the latch from properly securing to the handle. Check the latch for any signs of damage or wear, and replace any damaged components as needed.
- Incorrect installation of the latch: It is possible that the latch was not properly installed. Double-check the installation instructions and make sure that all components were installed in the correct order and orientation.
If you have checked these possible causes and the issue still persists, it may be necessary to contact the manufacturer or a qualified repair technician for further assistance.
2/14/2023 5:26:22 AM •
Vacuums
•
Answered
on Feb 14, 2023
Not finding what you are looking for?