20 Most Recent
Oster Golden A5 2-Speed Universal Motor Clipper 78005-140 - Page 3 Questions & Answers
I have just had all the blades sharpened for my
It is common to that a Blade Sharpening Service return your blades just as blunt as before, or even worse.
I advise that you try a new Blade Sharpening Service; trying out only a couple blades to begin with.
I recommend a mobile/on-site sharpening service.
What are the 2 slot
I take it you mean the plastic srews? these are plastic caps behind which are the carbon brushes.
I have an oster a5
Its possible the
gear wheel which is located under the name plate has slipped, if you remove the plate, lever and drive link the gear will pull off.
Inspect the teeth on the gear if there are signs of damage or slipping this is likely to be the problem.
How do you put on a blade when you took it off?
There is a picture of an oster clipper in the picture so I assume you are talking about an A5 style blade/clipper. Hold the clipper with the hinge facing you, if the hinge is open, then turn the blade so the blade number is facing up and slide it onto the open hinge, start the clipper and push the blade down to shut it. If the hinge is not open, prize it open with a flat head screwdriver.
www.sheaeaseltd.com
I have oster 6550 series
the tension should be pre set from the factory, if its more than one blade your having problems with then its likely there is a problem with the clippers.
I have not used my
ok rush can be removed with wire wool or a wire brush and will be prevented by the application of oil.
Grease should be inserted into the gearbox which is located under the name plate, for clipper oil have a look at the
page.
I have oster titan clippers.
ok if the brass inserts are allowing the hinge to move away from the clipper this will obviously cause a few problems, you will need to replace the body housing (new housing comes with a different design) you can view the
clipper parts here
I have an Oster Golden A5 2 Speed animal clipper
hi, if you look at the blade while its attatched to your clipper, at the back edge of the blade there is a black metal peice called a Latch push this towards the blade and pull the front edge away from the clipper it will hinge away then you can pull it straight off.
As for an instruction manual if you have no luck
contact us and we can send one to you.
Hi I bought Oster golden
it's seem that your clipper blade are out of adjustment and also dull, The Lever from what you stated your Lever is worn out also. The only way I can help is to send your clipper and blades to us so we can make all the necessary adjustment, replace the worn out part and sharpen your clipper blades.
I don't know how many blade you have, but we can work some thing out to help you solve your problem. You can e-mail at
[email protected]
We have been in sharpening business since 1990 You can check out my rating on
Yahoo.com
Manny's Sharpening
I got the blades wet while my A-5 2 speed
My best advise is to send your A5 Clipper to a professional service center or repair dealer. Because you are dealing with electricity caution is need when repairing. Manny's Sharpening has over 20 years in the clipper repair business. They have a mail order service
Check his website
Mannys-sharpening.com
Not finding what you are looking for?