20 Most Recent Maax Calla 6042 Bathtub - 101058-000 - Page 5 Questions & Answers

For owners manuals you will need to contact Maax. here is a link I found to their installation manuals for all their products.

The breaker the manual is referring to will be the main circuit breaker at the panel. If the system is not running the purge cycle as it is supposed to and turning the power on and off does not reset the control box then it is likely that the control box has a bad part in the circuity and should be replaced. Rod US Parts Center

I asked the same question to the tech guy at customer service and he said no, because the water detector switch is actually a density switch, so the temperature really doesn't matter. The tub just has to be filed with water.

wire an extra thermostat to it..have it control the heat

an inline heater does not heat the water it only maintains the water temperature that is in the bath. try filling the bath with the required water temperature and see if the heater maintains that temperature. good luck

Has water got near or on the connections to the panel? Look for any signs of water below it or mould on the floor etc.

You will need a wire to make the control work. What is the model number of the control box under the tub?US Parts Center