20 Most Recent American Standard 2770.018w.020 Cadet Whirlpool White - Page 4 Questions & Answers

Run a short snake thru the line. Somewhere between the drain and the tee into the line with the sink is a clog.

Be sure to pull the plunger all the way up when diverting the water between the the tub and shower if ti keeps giving you a problem it's faulty

depress and release button and whirlpool will stop

It's possible you installed the valve upside down, all values should be labeled in some way marking either hot and cold or it will say the word up where the riser tube port for the shower head is. If that's not the case remove the tub spout and check for any obstruction sometimes during tile or constructing debris can get into the pipe for your tub spout. Lastly the diverter on the tub spout could be bad. Try a new tub spout

Trey, motor or pump is seized, have tech. take a look and repair.

1. Turn off the water at the shutoff valve, flush the toilet and hold down the handle. There may be a little water left in the bottom of the tank, but don't worry about it. Wipe the flapper seat with a clean cloth to make sure it's free of debris, and check it for cracks or splits (Image 1).

   How to Fix a Leaking Toilet ' how-tos ' DIY

   www.diynetwork.com/how-to/.../how-to-fix-a-leaking-toilet DIY Network
   Feedback

How to Fix a Leaky or Runny Toilet - This Old House

www.thisoldhouse.com > ... > Toilets
This Old HouseA toilet that leaks or runs is an easy homeowner fix-if you know how to diagnose the trouble. ID parts and problems with this handy guide, and hit the hardware ...