20 Most Recent Samsung CLX-3305FW Color Laser Multifunction Printer - Page 9 Questions & Answers

Test the power cable on another printer and sees if it powers it..check the power supply if it is up to or not more than the required output voltage to power the printer..if problem persist check power board of the printer and read if their is still continuity on the fuse ..read the fuse with multimeter..the fuse if the printerust have been discontinued

reset Samsung SL-M2070/M2070W Samsung SL M2070 M2070W

For me it was a standard paper jam. I pulled out the paper tray, reached under and pulled out a jammed sheet, then reinserted the paper tray and it worked.

http://sam4scashregisters.blogspot.com/2014/02/how-to-reset-sam4s-er-650-cash-register.html

To reset Samsung printer manually, firstly press the Power button until the LED light turns off. Before proceeding to next step, confirm that your Samsung printer is off. Now, you have to remove the power cable from the back of Samsung printer and then leave your printer unplugged for 10 minutes. https://www.printerstechnicalsupport.com/how-to-reset-samsung-printer-firmware

https://www.youtube.com/watch?v=AN973Ko0kX8

To print a duplex page, follow these steps:

1. Go to Device and Printers. ...
2. Right click on the printer, then select Printer Preferences. ...
3. Below Double-Sided Printing select Long Edge or Short Edge depending on preference. ...
4. Click Apply and OK to save the changes.

https://support.hp.com/in-en/document/c05589026

https://www.youtube.com/watch?v=K93j4hdTpZQ This error is caused by a counter inside your printer not being correctly reset when the new belt is installed. To fix this problem follow the steps below: Press MENU then #1934. Use the arrow keys to navigate to the Tech menu (this is different to the User Mode)

printer is set to print on legal size paper....set to letter size

I searched the internet using https://www.google.com to see if I could locate support information for this printer.The following link mentions software but didn't show how to troubleshoot the printer for that problem.https://support.hp.com/us-en/drivers/selfservice/samsung-scx-3201-laser-multifunction-printer-series/19135195

https://www.manualslib.com/manual/837695/Samsung-Clx-3185.html?page=98 https://www.justanswer.com/computer/852tp-samsung-clx-3185-fn-printer-when-switch.html https://support.hp.com/us-en/document/c05852076

https://eu.community.samsung.com/t5/Cameras-IT-Everything-Else/Samsung-SCX-3200-Printer-Double-Printing-Problem-Software/td-p/260539

this is a list of a lot of manual for your printer in the link below

http://www.samsung.com/us/support/downloads/SCX-4623FW

Well go to this link of Samsung support web page an downlod it. Is so easy.
http://www.samsung.com/uk/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010400&prd_mdl_cd=&prd_mdl_name=ML-1210

https://brother-printer-support.net/blog/how-to-fix-brother-printer-error-0x803c010b/ check it

I am only guessing at this point but there should be a tap that sticks out from the back of the rear door ( much like the way a microwave door has a tab on it that lets you know that the door is fully closed ) so check the back of your printer to make sure that the tab is still in place and if it is, check to see if it is doing what it was meant to do, also the tab system might have been replaced with a small magnet or a metal plate that makes contact with each other and when this is done the printer knows the door is closed, so if all looks good then it could be the electronic part that the tab or magnet comes into contact with and this is faulty or misaligned, remember to look closely at the back of the door to see if a tab has been broken off or is missing. So also study the printer body and look for a way in which the printer knows that the door might be open eg. some sort of electrical switch that tell the printer that the door is not shut and then ask yourself why the switch is not been activated.You might have to takes steps like gluing on a tab or wedging something in between the switch to trick the printer into thinking that the door is shut but a little bit of detective work is required on your behalf.

You should try feeding one sheet at a time and make sure u are using paper that is compatible

Changing the Display Language and Country Setting Language To change the language that displays on the control panel, follow these steps: 1 Press Menu until "Machine Setup" appears on the top line of the display. 2 Press the scroll button ( or ) until "Language" appears on the bottom line of the display. 3 Press Enter. The current setting appears on the bottom line of the display. 4 Press the scroll button ( or ) until the language you want appears on the display. 5 Press Enter to save the selection. 6 To return to Standby mode, press Stop/Clear. Setting Country 1 Press Menu until "Machine Setup" appears on the top line of the display. 2 Press the scroll button ( or ) until "Select Country" appears on the bottom line of the display. 3 Press Enter. The current setting appears on the bottom line of the display. 4 Press the scroll button ( or ) until your country appears on the display. 5 Press Enter to save the selection. 6 To return to Standby mode, press Stop/Clear. NOTE: Changing the country clears the memory. Link to manual http://h10032.www1.hp.com/ctg/Manual/c05786751

You can download the drivers/User Manual from the Samsung Official Support site. Here is the link for Samsung SCX-4521F. Click Manual, download and refer to Section 7, Page 38 onwards for detailed instruction about setting up fax. Also you can click Drivers, select Operating System and get the drivers/ software

Let me know if any further clarification/ assistance is required.

Good Luck!
CreativeTECH

The Universal Print Driver from Samsung - available from their support site at

http://www.samsung.com/hk_en/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010400&prd_mdl_cd=&prd_mdl_name=ML-1710P

should work with both 32 and 64 bit versions