20 Most Recent Delta Model 473: Saxony Kitchen Pull-Down/Out Faucet - Venetian® Bronze - Page 5 Questions & Answers


There is a "p" trap in the drain.
It can be cleaned by unscrewing it.
You'll need to but a bucket under it to catch the water when you unscrew it.

Delta Plumbing | Answered on Jan 12, 2016


The cartridge could be leaking. It's a common failure of single handle faucets.

Delta Plumbing | Answered on Dec 07, 2015


From Delta direct, but that model number seems incorrect.
If you go to Home Depot, they have replacement ceramic washers which are often supplied free of charge as they are not supposed to fail.
Model Number Search Results

Delta Plumbing | Answered on Oct 23, 2015


Check installation manual if there is some indication about some kind of advice for this case. If there is no indication for the user, most probably your Delta Touch20 kitchen faucet is defective. Check your warranty terms about how you can return it to be changed or send it for service, so probably you'll have to uninstall it.

Delta Plumbing | Answered on Jul 03, 2015


usually have a setscrew in them!! mine are allen heads very small

Delta Plumbing | Answered on Feb 15, 2015


usually there are 2 O rings under the swivel head turn water off then take the top off the swivel I use strap wrenches and replace the O rings use some plumbers lube on them . so it goes together easier and turns freely . Good Luck

Delta Plumbing | Answered on Feb 15, 2015


THERE HAS TO BE SOME THING HOLDING IT ON IT WILL NOT STAY BY ITSELF LOOK FOR A SMALL BOLT YOU CAN UNSCREW TO TAKE IT OFF. USE SOME WD 40 OR RUST REMOVLS SPRAY TO HELP LOOSEN.

Delta Plumbing | Answered on Feb 03, 2015


THERE IS A BALL JOINT INSIDE THE FAUCET THAT YOU WILL NEED TO REPLACE YOU CAN GET A REPLACEMENT FOR IT AT LOWE'S OR HOME DEPO AROUND 5 BUCKS.

Delta Plumbing | Answered on Feb 03, 2015


THE LINE MAY BE CRIPPED. TIGHTEN THE NUT OR REPLACE THE NUT IF IT WILL NOT TIGHTEN. YOU MAY NEED A LONGER WATER LINE TO GET AROUND THE BUMP.

Delta Plumbing | Answered on Feb 03, 2015


LOOK FOR A SET BOLT UNDER THE SPRAYER TAKE IT OUT TAKE SPRAYER OFF TO REPLACE

Delta Plumbing | Answered on Feb 03, 2015


TAKE IT APART. LOOK FOR SMALL SET (ALLEN) NUT/BOLT OR REGULAR NUT/BOLT YOU CAN TAKE OFF THEN TAKE OFF HANDLE AND REPLACE THE O RING.

Delta Plumbing | Answered on Feb 03, 2015


LOOK UP ON LINE UNDER 3S10H/C VALUE KIT FOR BATH TUB FAUCET. SEE IF THERE IS A MANUAL OR A TROUBLE SHOOTING PAGE.

Delta Plumbing | Answered on Feb 03, 2015


Hi, there is two possible problems, first off could be the tap jumper or there is air trapped in the pipes. Try replacing the tap jumper, alternatively open all the taps to release the air

Delta Plumbing | Answered on Jan 27, 2015


If the copper pipe is indeed leaking, you'll probably need to open the wall to fix it. Sometimes you can open the wall in back of the tile, in the adjoining room. Make sure this is the issue before you start this process.

Delta Plumbing | Answered on Dec 26, 2014

Not finding what you are looking for?
Delta Model 473: Saxony Kitchen Pull-Down/Out Faucet - Venetian® Bronze Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Delta Plumbing Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

john h

Level 3 Expert

22486 Answers

Mike

Level 3 Expert

4368 Answers

Are you a Delta Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Delta Plumbing

  • Delta Plumbing

Most Popular Question

delta 473 faucet very loose meets

  • Plumbing
Loading...