20 Most Recent
Delta Model 473: Saxony Kitchen Pull-Down/Out Faucet - Venetian® Bronze - Page 3 Questions & Answers
Bathroom sink pipes came apart and flooded our
Hi, W/D here.
Almost always, the shutoff valves are at the wall where water is supplied to the faucet. If the problem is with the drain piping, and the faucet valves don't leak, you don't have to shut off the water. Simply replace the drain piping and tighten it up. If you need any repair parts, you can get them from any hardware store. Please repost if there is anything else that I can help you with.
Good luck, and best regards,
--W/D--
How do you remove a neck from a delta faucet 172
Remove the handle by loosening the allen key. Next, unscrew the round retainer housing you just exposed by removing the handle. You now have access to the ball, cam, seats and springs for replacement.
My Delta kitchen faucet, model470 or 471,single handle pullout signature faucet, is not spraying properly or allowing a good water flow.
The first thing to check is the filter screen inside the nozzle. There should be a ring that you can unscrew right where the water comes out. You will probably have to use a pair of pliers to loosen it. Use an old dishcloth or rag between the ring and pliers. This will protect your shiny faucet from being scratched! Once the ring is off, look inside it. There should be a metal screen inside with very fine mesh. It will come right out, but you may have to use the tip of a knife to pry up on one edge to get it started. Most likely, it is clogged with sediment. Clean it by holding the clogged side down under a running faucet. This is backflushing. Remove any remaining sediment with a fine brush and reinstall by reversing the directions above. Some people just never put them back in, preferring the stronger flow of water. Good luck!
Not finding what you are looking for?