...12:00 starts flashing, then press the hr button again to set the hour. Then, press and hold the min button for 3 seconds until flashing starts - press the min button until minutes set. -Tha Mp3 ...
Question about Nespresso Coffee Makers & Espresso Machines
buttons for 3 sec and it will be back to normal opertion.... For some reason the sensor needs to read that the tray/container is out of the machine... My machine wont work after all these solutions. I
Question about Saeco Coffee Makers & Espresso Machines
...3 months. Having said this, my button is broken and permanently flashes. To reset the button, you are supposed to press it in for about 5-10 seconds after you have descaled. The flashing should ...
Machine has entered Descaling Mode. To exit, wait until all greens are flashing then hold all three buttons down at same time for about 3 seconds until machine bleeps. It should then perform as normal
Question about Keurig Coffee Makers & Espresso Machines
...it in and it's flashing "not ready." Nothing happens when I push the power button or menu button. It won't even heat the water. Desacle and run 3 flushings to get
Question about Nespresso Coffee Makers & Espresso Machines
...buttons down before and when you turn the machine on, again until the lights stop flashing - this will reset to factory settings. 3: The temperature is preset to be the optimum temperature for the ...
...3. Press the CLOCK button until the desired brewing time is displayed (See "How to Set the Clock" section of the manual). 4. Press the ON/OFF button to confirm the automatic time selected. NOTE: The ...
Question about Keurig Coffee Makers & Espresso Machines
...buttons keep flashing and nothing happens 1. Press the auto off and small cup at the same time. Then Immediately release and re-press the small cup three times. When it works the only light showing ...
...flashing- press and hold large cup button for 3-5 seconds (no light should show/flash from this button while you hold it down. The on/off will continue to cycle through its normal startup, after it ...
18 questions posted
Usually answered in minutes!