5701 VIPER 5701 2-WAY ALARM w/REMOTE START "chirp" Questions

no chirp when arming vehicle Either your siren is broken, not properly grounded, the system is in valet or, the chirps were deleted. To add chirps, turn the key on then off, immediately press and ...

remote: turn ignition on press and release programming/valet switch three times ( you will hear one chirp from system) press and release lock button on remote ( system responds with confrimation chirp

...INSTRUCTIONS Ignition on, press and release programming switch three times,you will hear one chirp ( channel1), press lock button on remote, press and release switch 1 time ( two chirps, ...

...Open door, turn ignition on then off. Press aand hold programming button until you hear one chirp. After you hear the chirp, release programming button, press and release button one then

...To program remote; ignition on, press and release programming switch 3 times, you will hear one chirp( channel 1),press the lock button, press and release the switch 1 time ( two chirps, channel

After I set alarm, it chirps once then 2 seconds later it chirps once again!! That second chirp is a status alert letting you know a zone was not able arm yet. Most common reason is that the dome ...

...or combination of buttons, push out the stored code by pressing the unused button until a long chirp is heard, then repeat 3 additional times. After this, you can add any desired unused ...

This alarm system karr 4040A is on a 2001 Ford Mustang. One chirp on, two chirps off. Sometimes it doesn't chirp on/off. replace it or the remotes battery you have to lock or unlock in the wright way ...

Stop horn from beeping on every action You can delete the chirp from the unit: turn the ignition on, then off, press and release the programming switch three (3) times. You should hear two chirps. You

...on and press and release the push button LED three times and check for a response.The alarm should chirp one time. If the alarm chirps one time, press and release the lock button on the remote. If ...