2008 Yamaha Royal Star Venture "clutch slipping" Questions

clutch spring assembly. The "shudder"(intermittent slipping) is caused by glazing. Make sure you are using the right lubricants for your bike, some synthetics can cause problems. 1)Adjust clutch cable

Clutch slipping under load in 5th gear When the bike is in the higher gears that is when the most load is on the clutch. If the bike is slipping it may be due to wear on the clutch components. One ...

...clutch cable or is it hydraulic? You must have some free play, if you do not this could be the cause off slipping in 5th gear. Also if all the plates look good , not flaked or burnt, the proper ...

...clutch seams to a slow slipping movement Make sure you have free play in the clutch lever. On a hydraulic system, as the plates wear, you loose free play. Try putting a tube on the clutch slave ...

...slipping clutch at higher rpm's in the higher gears. Neither one will creep if you start them in gear while holding the clutch, just top end issues. I have been advised that these bikes are notorious ...

I have a 2000 Yamaha Royal Star Venture with 50k miles. The clutch seems to begin to slip under heavy acceleration. What to do? join delphi forums, they have many many tips for concerns, search for a ...

I put the cliche in new. And now it wount go in 1st gear. It stals out every time tighten your clutch cable up so you get the max pull and cluth seperation,then it should slip into gear

...from g/ box at high speed Thank you greg Unfortunately, you can get noise from the transmission, clutch basket, drive shaft, pinion gears or rear wheel on the Royal Star. No way to tell which you ...

...partially engaging but will not move. I can move the bike by turning the drive line so I suspect a clutching problem. I recently changed the engine oil with a fully synthetic motor oil. A friend