...Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised ...
...Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised ...
...put the new filter in the same way you removed the old one and reassemble the bike hooking the vent hoses back to the tank and the fuel line turn the gas valve back to the on position and bolt the ...
Question about Yamaha Stratoliner S Motorcycles
...put back on that is usually enough to keep the straps secured from sliding front or back but depending on the placement of the bag straps you could place a strap behind a d-ring peg to keep the bag ...
Question about Yamaha Stratoliner S Motorcycles
...put them into the tops of the allen head hinge bolts. Then used a 6mm box end wrench to loosen them. They are very tight so the box end of the wrench is needed to break the locktight loose. Once ...
...put in and out of neutral, kickstand up and down, checked fuses..it just keeps cranking over but won't start. The nearest BMW shop is 1,000 miles away. Can you help? thanks doug There are some fuses ...
Question about Yamaha Stratoliner S Motorcycles
...put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one half ...
Question about Yamaha Stratoliner S Motorcycles
...Put tank and seat back in place and prepare for the response "why did I wait so long..." on the first ride... Hope that helps. A spark Plug socket, an extension for a ratchet, longer the better, and ...
Question about Yamaha Stratoliner S Motorcycles
...put it back on and drive safetly. Your battery is under the pillion passenger seat, to open it there is a key insert under the seat on right hand side. If you've still got life in your battery get it ...
...bottom of ur carburator bowl,undo this let all gas empty out,then re-tighten & then reverse steps to put tank back on.Fill with fresh gas try start,check for any leaks & should be good to
28 questions posted
Usually answered in minutes!
13 Questions
11 Questions
3 Questions
1 Questions